Black Diamond Memory
Black Diamond Memory BDSSDS512G 2.5" 512GB SATA enterprise SSD
- 2.5"
- 512GB
US$ 152,99
0.00190611BTC
Op voorraad
Black Diamond Memory
Black Diamond Memory BDSSDS256G 2.5" 256GB SATA enterprise SSD
2.5-inch SATA enterprise SSD with 256 GB capacity, up to 520 MB/s read and 470 MB/s write speeds, and a 2,000,000-hour MTBF
- Form Factor2.5"
- Capacity256GB
- InterfaceSATA III
- ControllerMarvell 88SS9188
- Max Sequential ReadUp to 520 MBps
- Max Sequential WriteUp to 470 MBps
- Faster boot and app loading up to 4x over HDDs
- Sequential read up to 520 MBps and write up to 470 MBps
- 5" SATA III form factor fits standard drive bays
- Marvell 88SS9188 controller with power-loss data protection
- 2,000,000-hour MTBF for enterprise-grade reliability
Sonic Series enterprise SSD
The Black Diamond Memory BDSSDS256G is a 2.5 inch SATA III solid state drive built for server and storage arrays. Its 256 GB capacity and Marvell 88SS9188 controller suit administrators who need dependable read performance for boot volumes or mixed workloads.
7 mm z-height and standard SATA connectors
The drive measures 7.00 mm high, 69.86 mm wide and 100.50 mm deep, matching the common 2.5 inch bay. With no moving parts it runs silently, resists shock and reacts to sudden power loss to protect stored data from corruption.
SATA III 6 Gbps interface limits
Sequential reads reach up to 520 MBps and writes up to 470 MBps, which is the practical ceiling of the SATA bus. Buyers who need higher throughput or lower latency should consider drives that use a faster interface. MTBF is rated at 2,000,000 hours and the operating range spans 0 °C to 70 °C.
Pluspunten
- Faster boot and app loading up to 4x over HDDs
- Sequential read up to 520 MBps and write up to 470 MBps
- 5" SATA III form factor fits standard drive bays
- Marvell 88SS9188 controller with power-loss data protection
- 2,000,000-hour MTBF for enterprise-grade reliability
Specificaties
| Brand | Black Diamond Memory |
|---|---|
| Series | Sonic Series |
| Model | BDSSDS256G |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Interface | SATA III |
| Controller | Marvell 88SS9188 |
| Max Sequential Read | Up to 520 MBps |
| Max Sequential Write | Up to 470 MBps |
| MTBF | 2,000,000 hours |
| Features | Faster: System boot up and application loading speeds up to about 4x faster than typical HDDs Reliable: Durable, with no moving parts leaving the SSD less likely to fail Security: Will react to sudden power loss, protecting valuable data from corruption before it turns off Economical: Optimized design allowing for a more affordable switch to SSD Multiple Capacities - For the more demanding workloads Silent: Runs without noise Resistance: Shock and vibration resistan |
| Operating Temperature | 0°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.86mm |
| Depth | 100.50mm |
| Verzendgewicht | 0.14 kg |
| Pakketafmetingen | 100 × 70 × 7 mm |
Andere versies van dit model
Nog 2 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Black Diamond Memory
Black Diamond Memory BDSSDS1T 1TB 2.5" SATA enterprise SSD
- 2.5"
- 1TB
US$ 372,99
0.0046471BTC
Op voorraadVragen over dit artikel
What maximum sequential speeds does the SATA III interface allow on this drive?
The SATA III link caps practical throughput at 520 MBps read and 470 MBps write for this model.
Will the 7.00 mm height fit a standard 2.5 inch bay or caddy?
Yes, the 7.00 mm z-height matches the common 2.5 inch form factor used in most server and laptop bays.
How is the drive installed and what step is often missed?
Connect the SATA data and power cables, secure the 69.86 mm × 100.50 mm chassis with screws, then initialise the 256 GB volume in the OS — skipping initialisation leaves the drive invisible.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
