Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold contacts

Brute Networks

Brute Networks 805671-S21 16GB DDR4 2133 ECC UDIMM

SKU CH-FMS5-QKPMC

16 GB DDR4 ECC UDIMM at 2133 MHz with CL15 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB DDR4 ECC UDIMM for data integrity
  • 2133 MHz speed with CL15 latency for responsive server performance
  • 20 V low-voltage operation reduces power draw
  • 2Rx8 dual-rank design increases memory density
  • HP 805671-S21 compatible for guaranteed system integration

HP Compatible 16GB DDR4 Server Module

This module is a 16GB 288-pin DDR4 UDIMM running at 2133 MT/s with CL15 latency and 1.20V operation. It uses a 2Rx8 organisation and includes ECC error correction for data integrity. The part matches HP part number 805671-S21 and is built with major-brand DRAM chips.

Suits HP Servers Needing Unregistered ECC UDIMMs

It fits administrators upgrading or repairing HP platforms that require unregistered ECC UDIMMs at the 2133 MT/s speed grade. Sites needing registered RDIMMs, load-reduced LRDIMMs, different capacities per module, or non-ECC memory for consumer desktop boards should look elsewhere.

288-Pin DDR4 UDIMM Form Factor Decides Fit

The 288-pin DDR4 UDIMM form factor is the single specification that determines whether this module will install in a given system. Only motherboards or servers with DDR4 UDIMM slots accepting unregistered ECC modules at this speed and voltage can use it.

Pluspunten

  • 16 GB DDR4 ECC UDIMM for data integrity
  • 2133 MHz speed with CL15 latency for responsive server performance
  • 20 V low-voltage operation reduces power draw
  • 2Rx8 dual-rank design increases memory density
  • HP 805671-S21 compatible for guaranteed system integration

Specificaties

BrandHP
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

Vragen over dit artikel

Does the DDR4-2133 interface limit bandwidth to PC4-17000 speeds?

Yes, the module is rated PC4-17000, which equals 17,000 MB/s maximum theoretical bandwidth at 2133 MT/s.

Will this 288-pin UDIMM fit a standard server DIMM slot?

It uses the industry-standard 288-pin DDR4 UDIMM form factor, so it fits any server motherboard slot keyed for unregistered DDR4 memory.

Is any BIOS setting required to enable ECC on this 2Rx8 module?

ECC is a hardware feature of the DRAM; enable ECC in the server BIOS after installation, then save and reboot to activate error correction.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.