Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 server memory module with black chips

Brute Networks

Brute Networks P03054?091 64GB DDR4-2933 4Rx4 Load Reduced server RAM

SKU CH-HFVX-KC52Y

64GB DDR4-2933 Load Reduced ECC server memory with 4Rx4 organisation, 1.2V operation and 288-pin form factor

  • Capacity64GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64 GB capacity for memory-intensive server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Load Reduced 4Rx4 architecture supports high-density configurations
  • 2 V operation reduces power draw per module
  • 100 % HPE compatible with major-brand Samsung, SK Hynix or Micron chips

64GB DDR4-2933 Load Reduced DIMM

This 64GB DDR4-2933 module uses a 288-pin form factor and operates at 1.20V. It is built for HPE servers that require Load Reduced ECC memory. The 4Rx4 organisation allows high density in a single slot. Buyers needing non-ECC or unbuffered DDR4 cannot use this module.

Thermals and power at 1.20V

The DDR4-2933 rating corresponds to PC4-23400 bandwidth at the standard 1.20V. Load Reduced buffering reduces electrical load on the memory controller, helping keep power draw predictable during normal server operation. No active cooling is integrated on the DIMM itself.

Sustained load behaviour

Major-brand Samsung, SK Hynix or Micron DRAM chips are used throughout. Identical modules are supplied per order to avoid timing mismatches in multi-DIMM configurations. The Load Reduced design maintains signal integrity across all ranks during extended workloads. Systems without Load Reduced support will not post with this memory.

Pluspunten

  • 64 GB capacity for memory-intensive server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Load Reduced 4Rx4 architecture supports high-density configurations
  • 2 V operation reduces power draw per module
  • 100 % HPE compatible with major-brand Samsung, SK Hynix or Micron chips

Specificaties

BrandHPE
Capacity64GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset

Vragen over dit artikel

How do I install this 288-pin DDR4 module and what step do people often miss?

Align the notch with the slot key, press straight down until both retention clips click, then verify the server BIOS shows the full 64 GB at 2933 MHz — skipping the BIOS check is the step most often missed.

What maintenance or replacement will this 4Rx4 load-reduced DDR4 need later?

No scheduled maintenance is required; if a module ever fails, replace it with an identical 64 GB 4Rx4 DDR4-2933 stick to keep rank balance and ECC integrity.

What limit appears first when this 1.20 V DDR4-2933 memory runs under sustained load?

The memory controller’s maximum supported rank count per channel is reached before thermal or voltage limits, so population rules cap how many 4Rx4 modules you can install.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.