Brute Networks
Brute Networks P11442-191-BN 16GB DDR4-3200 ECC RDIMM 1Rx4 1.2V
HPE-compatible 16 GB DDR4-3200 ECC registered RDIMM, part P11442-191, 1Rx4 organisation, 1.2 V operation
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16GB DDR4-3200 ECC RDIMM protects data integrity in servers
- 2V operation reduces power draw and heat in dense racks
- 1Rx4 single-rank layout enables higher capacity per channel
- 288-pin DDR4 form factor fits standard server DIMM slots
- 100% HPE P11442-191 compatible for drop-in upgrades
Compatible HPE server memory
This Brute Networks module is a 16GB DDR4-3200 ECC registered RDIMM built to match HPE part number P11442-191. It runs at 1.2V with a 1Rx4 organisation and uses major-brand DRAM chips. The 288-pin DIMM is designed for direct replacement in qualified HPE servers.
Suits HPE refreshes, not consumer builds
IT teams refreshing HPE ProLiant or Apollo platforms that require registered ECC memory at DDR4-3200 will find this module a direct fit. Builders using consumer motherboards, laptops or workstations that accept only unbuffered non-ECC DIMMs cannot use this part.
Fits registered DDR4 channels
The DIMM plugs into a 288-pin registered DDR4 slot and draws 1.2V, leaving headroom in the server's memory-power budget. Identical modules ship together so multi-channel populations stay matched. The registered buffer reduces electrical load on the memory controller, helping stability in high-density configurations.
Pluspunten
- 16GB DDR4-3200 ECC RDIMM protects data integrity in servers
- 2V operation reduces power draw and heat in dense racks
- 1Rx4 single-rank layout enables higher capacity per channel
- 288-pin DDR4 form factor fits standard server DIMM slots
- 100% HPE P11442-191 compatible for drop-in upgrades
Specificaties
| Brand | HPE |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
Vragen over dit artikel
Does this 288-pin DDR4 RDIMM require an open ECC-registered slot on a compatible server motherboard?
Yes, it needs a free 288-pin DDR4 slot that supports ECC registered memory; the module is 1Rx4 at 1.2 V and will not work in unbuffered or non-ECC slots.
Can this module run in a system that already has HPE-branded P11442-191 DIMMs installed?
The stick is built from the same major-brand components (Samsung, SK Hynix or Micron) and is guaranteed compatible, so it will operate alongside existing HPE P11442-191 modules when populated per the server's memory-configuration rules.
How can I verify the module is detected at 3200 MT/s with ECC active after installation?
Check the server BIOS or UEFI memory information screen — it should show 16 GB, DDR4-3200 (PC4-25600), 1Rx4, registered, ECC enabled for this DIMM.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.



