Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 DIMM with black chips and gold contacts

Brute Networks

Brute Networks P19041?H21 16GB DDR4-2933 1Rx4 Registered ECC server RAM

SKU CH-65X7-BAAG0

HPE-compatible 16 GB DDR4-2933 registered ECC module with 1Rx4 layout, 1.2 V operation and 288-pin DDR4 interface

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR4-2933 registered ECC for stable server workloads
  • 1Rx4 single-rank layout improves memory density per channel
  • 2V low-voltage operation reduces system power draw
  • 288-pin DDR4 form factor fits standard server DIMM slots
  • 100% HPE compatible validated to maintain factory warranty

Compatible Server Memory Upgrade

This 16GB DDR4 module is built for HPE servers that require registered ECC memory. It targets administrators who need to expand capacity in existing infrastructure without purchasing OEM-priced parts. The stick matches HPE part number P19041?H21 and runs at 2933MHz with a 1.20V operating voltage.

Straightforward Installation

The 288-pin DDR4 form factor fits standard server DIMM slots and requires no special tools. Because the module is 100% tested and validated, compatibility issues are rare. The main risk is mixing registered ECC with unbuffered non-ECC memory, which prevents the system from booting. All modules in an order are identically matched to avoid rank or chipset mismatches.

Verify Before Ordering

Confirm that your server platform supports DDR4 registered ECC DIMMs and accepts 1Rx4 organisation at the PC4-23400 speed grade. Check the motherboard manual for maximum capacity per slot and total channel population limits. Ensure the system firmware is current, as older BIOS revisions may not recognise newer major-brand chipsets.

Pluspunten

  • 16GB DDR4-2933 registered ECC for stable server workloads
  • 1Rx4 single-rank layout improves memory density per channel
  • 2V low-voltage operation reduces system power draw
  • 288-pin DDR4 form factor fits standard server DIMM slots
  • 100% HPE compatible validated to maintain factory warranty

Specificaties

BrandHPE
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Vragen over dit artikel

How do I confirm the 16GB DDR4-2933 module is running at the correct speed and ECC is active after installation?

Enter the server BIOS or UEFI on first boot and verify the memory speed reads 2933 MT/s and ECC status shows enabled for the 1Rx4 registered DIMM.

What ships with the P19041?H21 module and what must I source separately?

The box contains the 16GB 288-pin DDR4-2933 1Rx4 registered ECC DIMM only; no additional cables, brackets or software are included or required.

Which capacity and rank should I choose for a server that needs 16GB per slot at 2933 MT/s with registered ECC?

Select the 16GB 1Rx4 PC4-23400 version; it delivers the exact density, speed and registered ECC profile specified for that configuration.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.