Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR3 SO-DIMM module with black memory chips and gold edge connector

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3-1333 SO-DIMM CL7 1.5V HP All-In-One 100B

SKU CH-JT3F-11WT2

4GB DDR3 SO-DIMM module running at 1333 MHz with CL7 latency for HP All-In-One 100B desktops

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 4GB DDR3 SO-DIMM boosts HP All-In-One 100B responsiveness
  • CL7 latency at 1333 MHz accelerates everyday tasks
  • 5 V unbuffered design matches factory power requirements
  • 204-pin form factor fits the system's two memory slots
  • Major-brand chipset ensures reliable compatibility with HP 100B desktop

Compatible DDR3 SO-DIMM upgrade

This 4 GB DDR3-1333 SO-DIMM module is built specifically for the HP All-In-One 100B desktop. It uses a 204-pin unbuffered design with CL7 timing and runs at the standard 1.5 V. The stick adds a single 4 GB rank to one of the two available sockets.

Thermals and power in daily use

Operating at 1.5 V with no heat spreader, the module draws minimal power and produces little heat inside the compact all-in-one chassis. Passive cooling from the system airflow is sufficient for normal workloads. Noise remains unchanged because the memory adds no active cooling components.

Single-stick kit simplicity

The package contains only one 4 GB SO-DIMM, so installation is a matter of inserting it into a free slot. No extra cables, brackets or software utilities are included. The system can reach its 8 GB maximum by adding a second matching module later.

Pluspunten

  • 4GB DDR3 SO-DIMM boosts HP All-In-One 100B responsiveness
  • CL7 latency at 1333 MHz accelerates everyday tasks
  • 5 V unbuffered design matches factory power requirements
  • 204-pin form factor fits the system's two memory slots
  • Major-brand chipset ensures reliable compatibility with HP 100B desktop

Specificaties

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp All-In-One 100B Desktop
Package Content1 Memory RAM Stick

Vragen over dit artikel

How do I install this 204-pin SO-DIMM in the HP All-In-One 100B, and what step is often missed?

Power off and unplug the system, remove the rear access panel, insert the module at an angle until the gold contacts are hidden, then press down firmly until both side clips click — the click is the step many skip.

What maintenance or replacement will this 4 GB DDR3-1333 module need later?

No scheduled maintenance is required; keep the interior dust-free and reseat the stick only if the system fails to POST after moves or upgrades.

What limit appears first during sustained workloads on this CL7 1.5 V kit?

The 4 GB capacity ceiling is reached before thermal or voltage limits, causing swapping once the OS and applications exceed available memory.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.