Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green circuit-board SO-DIMM modules, gold edge connectors, black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1066 SO-DIMM A68

SKU CH-D5YF-5B40Y

8GB DDR3 1066 SO-DIMM kit validated for Supermicro C7X58, X8SAX, X8ST3-F and X8STE motherboards

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB dual-channel kit boosts multitasking on supported Supermicro boards
  • 1066 MHz DDR3 speed matches PC3-8500 spec for stable operation
  • CL7 7-7-7 timings reduce latency for responsive performance
  • 204-pin SO-DIMM form factor fits compatible Supermicro motherboards
  • 5 V unbuffered non-ECC modules install in matched pairs

Compatible Supermicro Server Memory

This 8 GB kit contains two 4 GB DDR3 1066 SO-DIMM modules built for Supermicro C7X58, X8SAX, X8ST3-F and X8STE motherboards. The unbuffered, non-ECC sticks run at 1.5 V with CL7 timings and use major-brand chipsets under the Computer Memory Solutions guarantee.

Suited for matched-pair upgrades

The modules must be installed in pairs to enable dual-channel operation on the supported boards. Builders who need ECC error correction, registered DIMMs, higher speeds or larger single-module capacities should look at a different specification.

204-pin DDR3 1066 SO-DIMM form factor

Each stick is a 204-pin SO-DIMM rated at PC3-8500 with 2Rx8 organisation. This physical and electrical interface is the single specification that determines whether the kit will fit and function in the target Supermicro systems.

Pluspunten

  • 8GB dual-channel kit boosts multitasking on supported Supermicro boards
  • 1066 MHz DDR3 speed matches PC3-8500 spec for stable operation
  • CL7 7-7-7 timings reduce latency for responsive performance
  • 204-pin SO-DIMM form factor fits compatible Supermicro motherboards
  • 5 V unbuffered non-ECC modules install in matched pairs

Specificaties

BrandComputer Memory Solutions
ModelCM512648500DIMMDR
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSupermicro C7X58, X8Sax, X8St3-F, X8Ste Motherboard
Package Content2 Memory RAM Sticks

Vragen over dit artikel

Should I pick the 2x4GB kit or a single 8GB stick for my Supermicro board?

The kit contains two 4GB modules that must be installed in pairs for dual-channel operation on the C7X58, X8SAX, X8ST3-F or X8STE boards.

What does the 1066 MHz speed actually deliver in my system?

The modules run at 1066 MHz (PC3 8500) with CL7 timing and 1.5 V, providing the rated bandwidth when the motherboard supports that frequency.

Will the 204-pin SO-DIMM fit the 240-pin slots on my X8SAX?

No, this kit uses 204-pin DDR3 SO-DIMMs, while the listed Supermicro boards require 240-pin DIMMs, so they are physically incompatible.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.