Computer Memory Solutions
Computer Memory Solutions CM10247210600ECCNR2R8 32GB (4x8GB) DDR3 1333 ECC Unregistered DIMM
32 GB kit of four 8 GB DDR3-1333 ECC unregistered DIMMs validated for Dell PowerEdge T110 II servers
- Capacity32GB (4 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 32 GB total capacity across four 8 GB modules
- DDR3 1333 MHz speed with CL9 latency for responsive server operation
- ECC unregistered design detects and corrects single-bit errors
- 5 V standard voltage keeps power draw predictable
- Validated for Dell PowerEdge T110 II with Xeon E3 processors
Compatible Dell PowerEdge T110 II kit
This 32 GB kit contains four 8 GB DDR3 1333 modules built for the Dell PowerEdge T110 II. The memory runs at PC3 10600 with CL9 timing and 1.5 V operation. ECC error correction is included while the modules remain unregistered. The 240-pin DIMM format matches the server's four memory slots.
Xeon E3 series require unbuffered ECC
The kit suits administrators upgrading a PowerEdge T110 II to its 32 GB maximum using Xeon E3 processors that demand unbuffered ECC memory. Builders needing registered ECC modules or a higher capacity than four slots allow should look elsewhere. Systems outside the validated compatibility list are not supported.
240-pin DDR3 1333 unregistered ECC
The decisive specification is the 240-pin DDR3 1333 unregistered ECC design. Only motherboards accepting this exact module type can use the kit, and the PowerEdge T110 II is the validated platform.
Pluspunten
- 32 GB total capacity across four 8 GB modules
- DDR3 1333 MHz speed with CL9 latency for responsive server operation
- ECC unregistered design detects and corrects single-bit errors
- 5 V standard voltage keeps power draw predictable
- Validated for Dell PowerEdge T110 II with Xeon E3 processors
Specificaties
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10247210600ECCNR2R8 |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Dell Poweredge T110 Ii |
| Package Content | 4 Memory RAM Sticks |
Vragen over dit artikel
Will the four 8 GB modules run together with any existing DDR3 1333 ECC unregistered DIMMs I keep in my Dell PowerEdge T110 II?
The kit provides four 8 GB DDR3 1333 CL9 1.5 V ECC unregistered 2Rx8 modules; matching speed, voltage, ECC type and rank gives the best chance of stable mixed operation.
How can I confirm the 32 GB kit is recognised at 1333 MHz with ECC active after installation?
Enter the system BIOS or UEFI and verify the memory summary shows 32 GB total, 1333 MHz speed and ECC enabled for each populated slot.
Does the package contain only the four memory sticks or are any tools or cables included?
The box holds exactly four 240‑pin DDR3 DIMMs; no tools, cables or additional hardware are supplied.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.



