Computer Memory Solutions
Computer Memory Solutions CM1TBM2SATA6GBMLCX1 1TB internal SSD
A 1 TB internal SSD in M.2 2280 form factor with SATA interface and up to 2000 MB/s sequential read and write speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory ComponentsMLC
- InterfacePCI-Express 3.0 x4
- 1TB capacity stores large libraries and workloads
- M.2 2280 form factor fits compact laptops and desktops
- SATA 6Gb/s interface delivers up to 550MB/s sequential read
- MLC memory provides 300TB endurance for 240GB class
- Operating range 0°C to 70°C suits everyday use
1TB M.2 2280 SATA SSD
This 1TB internal solid state drive uses the M.2 2280 form factor and a SATA 6.0Gb/s interface. It is built with MLC memory components and a 26-pin connector for consumer workloads. The single-sided design helps it fit thin-and-light systems.
Sequential speeds up to 550 MB/s
Sustained sequential read and write reach up to 550 MB/s on the SATA Rev. 3.0 link with backward compatibility to SATA Rev. 2.0. Random 4k performance scales with capacity, reaching up to 80,000 read and 80,000 write IOPS on the 480GB reference point. Endurance is rated up to 800TB written and 0.93 DWPD at the same capacity.
Check M.2 key and SATA support
Verify that your motherboard or laptop provides an M.2 slot wired for SATA signalling, not PCIe only, and that the key matches the drive's connector. Confirm the operating temperature range of 0°C to 70°C suits your chassis airflow. The drive measures 80mm by 22mm by 3.5mm and weighs approximately 5.99g at the 256GB reference capacity.
Pluspunten
- 1TB capacity stores large libraries and workloads
- M.2 2280 form factor fits compact laptops and desktops
- SATA 6Gb/s interface delivers up to 550MB/s sequential read
- MLC memory provides 300TB endurance for 240GB class
- Operating range 0°C to 70°C suits everyday use
Specificaties
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1TBM2SATA6GBMLCX1 |
| Part Number | CM1TBM2SATA6GBMLC |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | MLC |
| Interface | PCI-Express 3.0 x4 |
| Connector | 26 Pin |
| Sustained Sequential Read | Up to 2000MBps |
| Sustained Sequential Write | Up to 2000MBps |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 0.0625" |
| Width | 0.875" |
| Depth | 3.125" |
Vragen over dit artikel
Will this M.2 2280 drive fit in a laptop slot that only takes single-sided modules?
Yes, the single-sided design integrates easily into thin-and-light systems with M.2 connectors.
What sequential read and write speeds can I expect over the SATA 6Gb/s interface?
Up to 550MB/s read and up to 520MB/s write for the 480GB capacity point; the 1TB model delivers up to 2000MB/s read and 2000MB/s write.
Does the drive include a heatsink, or will I need to add one for sustained workloads?
The drive ships without a heatsink and operates within 0°C to 70°C; add a motherboard heatsink if your chassis airflow is limited.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
