Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
White 120mm square frame case fan with transparent center ring and reverse curved blades visible through the hub

darkFlash

darkFlash INF34R 120mm Reverse Blade PWM ARGB Case Fan White

SKU CH-MT78-MJWH2

A 120 mm white case fan with reverse blades, dual-sided infinity mirror ARGB lighting and hydro bearing running 800-2000 RPM at 30-35 dBA

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness28mm
  • Bearing TypeHydro Bearing
  • RPM800-2000 PRM

Color White

Quantity 1-Pack

Fan Direction Reverse

  • Dual-sided infinity mirror ARGB with 360° illumination and 16.8 million colours
  • Tool-free daisy chain via 90° rotatable magnetic connector for clean cable routing
  • PWM adjusts speed from 800 to 2000 RPM matching system temperature
  • Hydro bearing rated 40000 hours MTTF with nine aerodynamic blades and eight anti-vibration pads
  • 120 mm reverse-blade design fits standard radiator mounts in white finish

120 mm dual-sided infinity mirror fan

The darkFlash INF34R is a 120 mm case fan with reverse blades and addressable RGB lighting on both sides. It targets builders who want a clean interior look and synchronised lighting through a 5 V three-pin ARGB header. The white frame and 28 mm thickness suit standard mounting points on cases and radiators.

Snap-on daisy chain with 90° rotatable connector

Multiple fans link together through magnetic splice connectors that rotate ninety degrees for easier routing. A PWM/ARGB splitter cable is included for the first fan. The only common issue is forgetting to plug the 5 V ARGB header into the motherboard, which leaves the lighting inactive while the fan still spins.

PWM speed range 800–2000 RPM and 30–35 dBA

The four-pin PWM connector lets the motherboard vary speed automatically between 800 and 2000 RPM, delivering 50–55 CFM. At the top of the range the fan reaches 35 dBA, so silent builds may need a custom curve. The hydro bearing is rated for 40 000 hours MTTF, but the 28 mm thickness can limit fitment in slim chassis or tight radiator stacks.

Pluspunten

  • Dual-sided infinity mirror ARGB with 360° illumination and 16.8 million colours
  • Tool-free daisy chain via 90° rotatable magnetic connector for clean cable routing
  • PWM adjusts speed from 800 to 2000 RPM matching system temperature
  • Hydro bearing rated 40000 hours MTTF with nine aerodynamic blades and eight anti-vibration pads
  • 120 mm reverse-blade design fits standard radiator mounts in white finish

Specificaties

BranddarkFlash
Part NumberINF34
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness28mm
Bearing TypeHydro Bearing
RPM800-2000 PRM
Air Flow50-55 CFM
Noise Level30 - 35 dBA
Power Connector4-pin PWM
ColorWhite
LEDARGB
FeaturesDreamy colorful ARGB lighting; Magnetic splice design; Aerodynamic blades; Magnetic wiring connector; FDB Hydro Bearing
Package Contents1 × INF34 ARGB Fan; 4 × Anti-vibration pads; 4 × Mounting screws; 1 × PWM/ARGB splitter cable; 1 × User manual

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I verify the 120mm fan is running within its 800-2000 RPM range after installation?

Connect the 4-pin PWM header to the motherboard and monitor the speed in BIOS or fan-control software; the fan will auto-adjust between 800 and 2000 RPM based on temperature.

Which accessories are included in the single-fan package and what must I source separately?

The box contains one INF34 ARGB fan, four anti-vibration pads, four mounting screws, one PWM/ARGB splitter cable and a user manual; additional fans or a 5V 3-pin ARGB controller are sold separately.

Should I choose the normal-blade or reverse-blade version for my build?

Select the reverse-blade model when you need intake airflow directed away from the motor hub — such as on a radiator push configuration — and the normal-blade version for standard exhaust or intake positions.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.