DELL
DELL 1.2TB 10000RPM SAS 2.5" internal hard drive
1.2 TB SAS drive spins at 10000 RPM in a 2.5 inch form factor for server workloads
- InterfaceSAS
- Capacity1.2TB
- RPM10000 RPM
- Form Factor2.5"
- 2 TB capacity stores large server datasets
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast host transfers
- 5 inch form factor fits dense drive bays
- New condition with 30 day supplier coverage
Drive interface and speed
This 2.5-inch internal hard drive uses a SAS interface rated at 12Gb/s and spins at 10000 RPM. It delivers 1.2TB of capacity for servers and storage arrays that require high-throughput block access. The drive is supplied new in retail or OEM packaging.
Server workloads and compatibility
The drive suits administrators upgrading or expanding Dell PowerEdge and compatible servers that accept 12Gb/s SAS 2.5-inch drives. Environments limited to slower SAS link speeds or different physical form factors cannot use this unit at its rated performance. Desktop PCs and consumer NAS boxes lacking SAS controllers are not supported.
12Gb/s SAS interface standard
The single specification that decides fitment is the 12Gb/s SAS interface standard. The server backplane and controller must support this exact link rate and the 2.5-inch form factor for the drive to operate as intended.
Pluspunten
- 2 TB capacity stores large server datasets
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast host transfers
- 5 inch form factor fits dense drive bays
- New condition with 30 day supplier coverage
Specificaties
| Brand | WXPCX |
|---|---|
| Part Number | WXPCX |
| Interface | SAS |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Vragen over dit artikel
Does the 1.2 TB SAS drive require any scheduled maintenance or component replacement during its service life?
The drive has no user-serviceable parts and no scheduled maintenance; if the mechanism fails the entire unit is replaced.
What is the first limit reached when the 10000 RPM drive runs sustained workloads?
The 12 Gb/s SAS interface caps sustained throughput before the spindle speed becomes the bottleneck.
How much heat and noise does the 2.5 inch 10000 RPM SAS drive produce when operating continuously?
The 10000 RPM spindle generates noticeable heat and audible seek noise, so adequate chassis airflow is required for all-day operation.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
