Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
A silver 2.5 inch SAS hard drive in a black Dell caddy

DELL

DELL 1.8TB SAS 2.5" 10K 12G 401-AASN 400-AHEG 400-AJQP 400-AIXX 400-AIWQ internal hard drive

SKU CH-9FQP-RPYHY

A 1.8 TB SAS drive spinning at 10K rpm with a 12 Gbit/s interface, supplied in a compatible caddy for Dell PowerEdge servers

  • 8 TB capacity stores large datasets
  • 10 K RPM spindle accelerates data access
  • 12 Gb/s SAS interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Supplied caddy fits listed Dell PowerEdge servers

1.8 TB SAS drive for Dell PowerEdge servers

This 1.8 TB SAS hard drive spins at 10K RPM and connects through a 12 Gbit/s interface. It ships with a compatible Dell caddy for direct installation in supported PowerEdge systems. The drive is new and carries a one-year warranty.

Sustained 10K RPM throughput for mixed workloads

The 10K spindle speed delivers consistent transfer rates during extended read or write sequences, avoiding the thermal throttling that can affect higher-speed drives in dense chassis. A 12 Gbit/s SAS link keeps the bus saturated under multi-threaded I/O without bottlenecking the controller. Steady performance suits databases, virtualisation hosts and logging arrays that run continuously.

Hot-plug caddy fits two-and-a-half-inch bays

The included caddy matches the tool-less drive trays used in Dell PowerEdge servers from the R210 through R930 families, allowing hot-swap replacement without powering down the chassis. A 2.5 inch form factor lets administrators pack more spindles into the same rack space compared to 3.5 inch alternatives. Buyers needing 3.5 inch bays or non-Dell enclosures cannot use this package as supplied.

Pluspunten

  • 8 TB capacity stores large datasets
  • 10 K RPM spindle accelerates data access
  • 12 Gb/s SAS interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Supplied caddy fits listed Dell PowerEdge servers

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

How much power and heat does the 10K 12G SAS drive generate during continuous operation?

The 10 000 rpm spindle and 12 Gb/s SAS interface are designed for enterprise duty cycles; typical power draw and thermal output match other 2.5-inch 10K SAS drives in this class.

Which server backplane or controller must I already have to install this 1.8TB 2.5-inch SAS drive?

A 12 Gb/s SAS backplane or HBA/RAID card with a 2.5-inch drive bay is required; the included Dell caddy fits the listed PowerEdge models from R210 through R930.

Will this 12G SAS drive work in an older PowerEdge that only supports 6G SAS backplanes?

Yes — the 12 Gb/s SAS drive is backward compatible with 6 Gb/s SAS backplanes and will operate at the lower link speed in those servers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.