DELL
DELL 300 GB 3.5" SAS 15000 RPM 16 MB internal hard drive
300 GB 3.5-inch internal hard drive with a SAS interface spinning at 15000 RPM and 16 MB cache for Dell PowerEdge servers
- InterfaceSAS
- Capacity300GB
- RPM15000 RPM
- Cache16MB
- Form Factor3.5"
- 15 000 RPM spindle speed delivers rapid data access for transaction-heavy workloads
- 16 MB cache buffers bursts to sustain throughput during peak I/O
- SAS 3 Gb/s interface provides a reliable server-grade connection
- 300 GB capacity fits operating system, applications and active data sets
- Qualified for Dell PowerEdge 1900 1950 2900 2950 6900 6950 and PowerVault MD1000 MD3000
Purpose-built enterprise drive
This Dell 300 GB 3.5" SAS drive spins at 15000 RPM with a 16 MB cache. It uses a 3Gb/s SAS interface and is designed for internal server installations. The drive fits standard 3.5-inch bays and targets high-throughput workloads in compatible Dell PowerEdge and PowerVault systems.
Suited for legacy Dell arrays
It fits Dell PowerEdge 1900, 1950, 2900, 2950, 6900 and 6950 servers as well as PowerVault MD1000 and MD3000 storage arrays. Buyers who need larger capacities, newer interface speeds or non-Dell hardware support should look at other drives. The 300 GB limit and SAS 3Gb/s link restrict use in modern high-density deployments.
Sustained spindle performance
The 15000 RPM spindle maintains consistent rotational speed under continuous read and write loads. The 16 MB buffer absorbs burst I/O while the SAS interface handles queued commands during extended operations. Mechanical latency stays predictable because the motor does not throttle down during long duty cycles.
Pluspunten
- 15 000 RPM spindle speed delivers rapid data access for transaction-heavy workloads
- 16 MB cache buffers bursts to sustain throughput during peak I/O
- SAS 3 Gb/s interface provides a reliable server-grade connection
- 300 GB capacity fits operating system, applications and active data sets
- Qualified for Dell PowerEdge 1900 1950 2900 2950 6900 6950 and PowerVault MD1000 MD3000
Specificaties
| Interface | SAS |
|---|---|
| Capacity | 300GB |
| RPM | 15000 RPM |
| Cache | 16MB |
| Form Factor | 3.5" |
Vragen over dit artikel
Does my server need a SAS backplane or controller to use this 3Gb/s SAS drive?
Yes — the drive uses a SAS interface at 3Gb/s, so the host must provide a SAS backplane or HBA that supports that link speed.
Will this 15000 RPM drive work in a PowerEdge 2950 alongside the existing drives?
The supplier lists the 2950 among compatible PowerEdge servers; the drive will operate at its rated 15000 RPM when installed in a supported bay.
How can I confirm the drive is recognised and healthy after installation?
Check the server BIOS or RAID utility — the drive should appear as a 300 GB SAS device with 16 MB cache and report a ready status.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
