Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-AFTB 300GB 2.5" SAS 10000 RPM 12Gb/s internal hard drive

SKU CH-JF7V-SRJGP

A Dell 400-AFTB 300 GB 2.5 inch SAS hard drive spinning at 10000 RPM with a 12 Gb/s interface and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity300GB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 10 000 RPM spindle speed for fast data access
  • SAS 12 Gb/s interface enables high-throughput transfers
  • 300 GB capacity stores critical workloads
  • 5-inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Dell 400-AFTB 300GB SAS drive

The Dell 400-AFTB is a 300GB internal hard drive with a 2.5 inch form factor and a SAS 12Gb/s interface. It spins at 10000 RPM and is supplied as a bare drive with a hot-swap tray. The unit is designed for Dell servers and storage arrays that accept 2.5 inch SAS drives.

Who this suits and who should look elsewhere

This drive suits administrators replacing a failed Dell 400-AFTB part or expanding a compatible 2.5 inch SAS bay. It is not for systems that lack a SAS 12Gb/s backplane or that require a larger capacity than 300GB. Buyers needing a different interface or a non-hot-swap mechanical design should select another model.

The specification that decides fit

The SAS 12Gb/s interface combined with the 2.5 inch 10000 RPM form factor determines whether this drive will install and operate in the target chassis. Verify that the server or array lists part number 400-AFTB as a supported component before purchase.

Pluspunten

  • 10 000 RPM spindle speed for fast data access
  • SAS 12 Gb/s interface enables high-throughput transfers
  • 300 GB capacity stores critical workloads
  • 5-inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Specificaties

BrandDell
Model400-AFTB
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity300GB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Vragen over dit artikel

How can I confirm the Dell 400-AFTB is spinning at 10000 RPM and communicating over SAS 12Gb/s after installation?

The drive should be detected by the RAID controller or HBA at 12Gb/s link speed, and SMART data will report 10000 RPM rotational speed.

The listing says packaging is bare drive; does the 400-AFTB include a hot-swap tray or must I supply my own 2.5" carrier?

The unit is a bare drive without a tray; you need a compatible 2.5" hot-swap carrier for your Dell server or enclosure.

We need several 300GB 10K SAS drives — is the 400-AFTB the only Dell part number for this capacity and speed combination?

400-AFTB is the specific Dell part number for a 300GB 2.5" 10K SAS 12Gb/s drive; other part numbers indicate different capacities or speeds.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.