Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

DELL

DELL EQL 1-TB 7.2K 3.5 SATA HDD

SKU CH-VVJY-VZ548

A 1 TB 3.5-inch desktop hard drive spinning at 7.2K RPM with a SATA interface

  • 1 TB capacity for large storage needs
  • 2K RPM spindle speed for responsive data access
  • 5-inch form factor fits standard desktop bays
  • SATA interface for broad motherboard compatibility
  • New condition ensures full manufacturer reliability

Dell EQL 1-TB SATA storage drive

The Dell EQL drive provides one terabyte of storage on a 3.5-inch SATA interface spinning at 7.2K rpm. It arrives in new condition with retail or OEM packing that may vary. This desktop internal hard drive suits systems built for bulk data retention rather than high-speed access.

Suits capacity-focused desktop builds.

Builders who need large, affordable capacity for archives, backups or media libraries will find the drive appropriate. Buyers who want faster random access or lower latency should look at solid-state alternatives. The SATA connection limits throughput to the interface maximum.

Single specification: 7.2K rpm rotational speed

The 7.2K rpm spindle speed determines the sustained transfer rate and access latency you can expect. If your workload demands higher IOPS or quicker seek times, this rotation speed will be the limiting factor. Verify that your motherboard provides a free 3.5-inch SATA bay before purchase.

Pluspunten

  • 1 TB capacity for large storage needs
  • 2K RPM spindle speed for responsive data access
  • 5-inch form factor fits standard desktop bays
  • SATA interface for broad motherboard compatibility
  • New condition ensures full manufacturer reliability

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Does my system need a free 3.5-inch drive bay and a SATA data cable to install this 1-TB 7.2K HDD?

Yes, the drive fits a standard 3.5-inch bay and connects through a SATA interface, so you will need an available bay and a SATA data cable plus power from the PSU.

Can I keep my existing SATA drives and add this 1-TB 7.2K unit without changing the controller mode?

The drive uses the same SATA interface as older SATA HDDs, so it will work alongside them on the same controller without any mode change.

How can I verify the 1-TB 7.2K SATA HDD is recognised and healthy after installation?

Check the BIOS or UEFI for the 1-TB capacity listing, then run the operating system disk utility or a SMART tool to confirm the drive reports no errors.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.