DELL
DELL EqualLogic 500GB 7200RPM 3.5" SATA U795J
A 500 GB, 7200 RPM SATA hard drive in a 3.5-inch hot-plug tray certified for Dell EqualLogic PS300E, PS1200E and PS2400E arrays
- InterfaceSATA
- Capacity500GB
- RPM7200 RPM
- Form Factor3.5"
- 500 GB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- SATA 3 Gb/s interface connects directly to EqualLogic arrays
- Hot-plug tray enables drive swaps without downtime
- Certified Dell firmware ensures array compatibility
Genuine Dell EqualLogic 500 GB SATA drive
This is a genuine Dell EqualLogic 500 GB 7200 RPM 3.5-inch SATA hard drive supplied in the Dell EqualLogic hot-plug tray. It carries the Dell EqualLogic serial number and firmware. The drive is designed for Dell EqualLogic PS series storage arrays including the PS100E PS200E PS300E PS400E and PS1200E PS2400E models.
Check your array tray and firmware
Verify that your storage array accepts the Dell EqualLogic 3.5-inch hot-plug tray shown in the product images. The drive runs at 3 Gb/s SATA speed and is certified for the listed EqualLogic PS series arrays. Buyers who need a different tray form factor or a non-EqualLogic firmware should not order this part.
Tray and firmware included
The bundled hot-plug tray lets the drive slide directly into the compatible EqualLogic PS series bays without extra hardware. The pre-loaded EqualLogic firmware ensures the array recognises the drive immediately and supports the group features such as live non-disruptive upgrades across up to 16 arrays. No separate carrier or firmware update is required.
Pluspunten
- 500 GB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- SATA 3 Gb/s interface connects directly to EqualLogic arrays
- Hot-plug tray enables drive swaps without downtime
- Certified Dell firmware ensures array compatibility
Specificaties
| Brand | Dell |
|---|---|
| Interface | SATA |
| Capacity | 500GB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Vragen over dit artikel
Does the Dell EqualLogic U795J arrive inside a hot-plug tray or must I buy one separately?
The drive ships installed in a Dell EqualLogic 3.5-inch hot-plug tray, so no separate tray purchase is required.
The listing mentions PS100E, PS200E, PS300E and PS400E — which one should I select for my array?
The part number U795J is certified for the PS300E, PS1200E and PS2400E arrays; choose the model that matches your existing chassis.
The headline says 3Gb/s SATA — what throughput can I expect once the drive is in a live array?
The 3Gb/s SATA link caps the interface at roughly 300 MB/s, while the 7200 RPM platters deliver sustained rates typical of a 500GB 7.2K nearline drive.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
