Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2609 v3 384GB DDR4

SKU CH-1FDF-0TSC7

Eight 3.5-inch drive bays, dual 1.9 GHz Xeon processors and 384 GB DDR4 memory in a 2U rack server

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.9GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2609 v3 CPUs deliver 12 cores at 1.9GHz for parallel workloads
  • 384GB DDR4 ECC registered memory supports large virtualisation clusters
  • Eight 3.5-inch drive bays with PERC H730 SAS controller enable high-capacity storage arrays
  • iDRAC8 Enterprise licence provides full remote lifecycle management
  • Redundant 495W power supplies maintain uptime during module failure

Dell PowerEdge R730 8-bay server

The Dell PowerEdge R730 is a 2U rack server fitted with two Intel Xeon E5-2609 v3 processors at 1.9GHz and 384GB of DDR4 ECC registered memory. Eight 3.5-inch drive bays connect through a PERC H730 SAS controller supporting SATA drives. Remote management uses iDRAC8 Enterprise. Dual 495W power supplies are installed.

Suits memory-heavy workloads in an eight-bay chassis

This configuration serves databases, virtualization hosts or backup targets that benefit from 384GB RAM and room for eight SATA drives. The two six-core CPUs provide moderate thread count. Buyers who need more than two processors, more than 768GB maximum memory, or a different drive interface should look at another platform.

PERC H730 SAS controller with eight 3.5-inch bays

The storage subsystem centres on a Dell PERC H730 RAID controller driving up to eight 3.5-inch SATA bays. No drives are included, so the buyer must supply compatible SATA disks. This controller and bay count define whether the server fits the intended storage layout.

Pluspunten

  • Dual Xeon E5-2609 v3 CPUs deliver 12 cores at 1.9GHz for parallel workloads
  • 384GB DDR4 ECC registered memory supports large virtualisation clusters
  • Eight 3.5-inch drive bays with PERC H730 SAS controller enable high-capacity storage arrays
  • iDRAC8 Enterprise licence provides full remote lifecycle management
  • Redundant 495W power supplies maintain uptime during module failure

Specificaties

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.9GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)8,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Vragen over dit artikel

What power supplies must already be present in the rack to run the dual 495W units in this R730?

The server includes two 495W power supplies for 12th Gen; ensure the rack PDU can deliver enough 12 V current for both units simultaneously.

Will the PERC H730 controller recognise older 3.5 inch SATA drives I want to reuse in the eight drive bays?

The H730 SAS controller supports SATA HDDs, so existing 3.5 inch SATA drives can be installed in the eight bays and configured in RAID.

How can I confirm the iDRAC8 Enterprise licence is active after the firmware update?

Log into the iDRAC web interface; the dashboard will display Enterprise licence status and show both Xeon E5-2609 v3 CPUs at 1.9GHz with 384GB DDR4 memory.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.