DELL
DELL RF9T8 1.8TB 10K SAS 2.5" internal hard drive
1.8 TB, 10 000 RPM SAS enterprise hard drive in a 2.5 inch form factor
- InterfaceSAS 6Gb/s
- Capacity1.8TB
- RPM10000 RPM
- UsageFor Enterprise Storage
- Form Factor2.5"
- High-performance 10K RPM spindle speeds up enterprise workloads
- 8TB capacity stores large datasets on a single drive
- SAS 6Gb/s interface provides reliable server connectivity
- 5-inch form factor fits dense storage arrays
- Built for enterprise storage environments demanding consistent uptime
Capacity and interface
This DELL RF9T8 drive provides 1.8TB of storage on a SAS 6Gb/s interface. It spins at 10000 RPM in a 2.5-inch form factor. The unit is designed for enterprise storage workloads and ships new in retail or OEM packaging.
Upgrade path
The drive replaces slower nearline or desktop-class disks in servers and arrays that accept 2.5-inch SAS bays. The jump is worth it when sustained throughput and lower latency matter more than raw capacity per spindle. Buyers needing higher density per bay should consider larger-capacity models.
Compatibility checks
Verify that your controller or backplane supports SAS 6Gb/s and supplies adequate power for a 10K RPM mechanism. Confirm the chassis has a free 2.5-inch bay with the correct carrier or caddy. Ensure firmware and RAID settings are compatible with the RF9T8 model before installation.
Pluspunten
- High-performance 10K RPM spindle speeds up enterprise workloads
- 8TB capacity stores large datasets on a single drive
- SAS 6Gb/s interface provides reliable server connectivity
- 5-inch form factor fits dense storage arrays
- Built for enterprise storage environments demanding consistent uptime
Specificaties
| Interface | SAS 6Gb/s |
|---|---|
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Usage | For Enterprise Storage |
| Form Factor | 2.5" |
Vragen over dit artikel
Will the 2.5" form factor fit a standard 3.5" drive bay?
The 2.5" form factor requires a 2.5" bay or a 3.5-to-2.5 adapter bracket; it will not mount directly in a 3.5" bay.
How do I install the SAS 6Gb/s interface correctly?
Connect the drive to a SAS backplane or controller using a SAS data cable; the common error is omitting the separate power connection required by the drive.
When should I plan to replace the 1.8TB 10000 RPM enterprise drive?
Monitor SMART attributes for reallocated sectors or rising seek errors; enterprise workloads typically replace 10000 RPM drives after 3-5 years of continuous use.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
