DELL
DELL VR92X 2TB 7.2K RPM 2.5" SATA internal hard drive
A 2 TB 7200 RPM 2.5-inch SATA enterprise hard drive with an included R Series caddy
- 2 TB capacity stores large datasets and backups
- 7200 RPM spindle delivers fast sequential read performance
- 6 Gb/s SATA interface provides high-throughput connectivity
- 5 inch form factor fits dense server bays
- Includes Dell R Series caddy for tool-free installation
Dell VR92X 2TB SATA enterprise drive
This Dell VR92X is a 2TB 2.5-inch SATA hard drive spinning at 7200 RPM for enterprise workloads. It ships new with an R Series caddy included for direct mounting in compatible Dell servers. The 6Gb/s interface matches standard SATA backplanes and controllers. Capacity and speed suit near-line storage and backup targets.
Installation notes and common issues
The drive fits any 2.5-inch bay that accepts a standard SATA data and power connector. Dell R Series caddy slides into tool-less rails on supported PowerEdge models without screws. Builders using non-Dell chassis must verify caddy dimensions or remove the drive from the tray. Firmware updates may be required for full compatibility with some RAID controllers.
Suitable buyers and mismatched needs
This unit suits administrators expanding Dell PowerEdge arrays with a tested enterprise spindle. Buyers who need solid-state latency or higher areal density should look at SSD alternatives. Systems limited to 3Gb/s SATA ports will not reach the rated throughput. Workloads demanding sustained write rates beyond a single 7200 RPM actuator should consider multi-drive arrays.
Pluspunten
- 2 TB capacity stores large datasets and backups
- 7200 RPM spindle delivers fast sequential read performance
- 6 Gb/s SATA interface provides high-throughput connectivity
- 5 inch form factor fits dense server bays
- Includes Dell R Series caddy for tool-free installation
Specificaties
Voor dit artikel zijn nog geen specificaties gepubliceerd.
Vragen over dit artikel
How do I verify the VR92X is running at 7200 RPM after installation?
Use SMART monitoring software to confirm the spindle speed reads 7200 RPM and run a sequential read test; sustained throughput near the SATA 6 Gb/s limit indicates the drive is performing as specified.
The listing mentions an R Series caddy — does the box include everything needed to mount the 2.5 inch drive in a Dell server bay?
Yes, the package contains the ST2000NX0423 drive and a Dell R Series caddy so the 2.5 inch form factor fits directly into compatible server bays without extra parts.
I see model ST2000NX0423 and part VR92X — are these the same 2 TB capacity or are there other capacities under these numbers?
Both identifiers refer to the single 2 TB configuration; no other capacities are associated with the VR92X or ST2000NX0423 part numbers.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
