Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

DOCTOR METAL

DOCTOR METAL UF-SL120-6B 6-pack 120mm ARGB case fan with controller

SKU CH-388T-K9ASM MPN UF-SL120-6B

Six 120 mm ARGB fans with fluid circulative bearings and a daisy-chain controller for up to 16 fans

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeFluid Circulative Bearing(FDB)
  • RPM800~1900 RPM
  • Air Flow55-60 CFM
  • Noise Level17-31 DB
  • Modular snap-together design cuts cable clutter and screw count
  • 32 ARGB LEDs per fan with front and rear illumination
  • PWM speed range 800 to 1900 RPM for quiet or high airflow
  • Fluid circulative bearing rated for long life at 17 to 31 dB
  • Controller handles up to 16 fans across four ports

Modular ARGB fan 6-pack

The DOCTOR METAL UF-SL120-6B provides six 120 mm ARGB fans that snap together using a modular frame, reducing individual wiring and screw count. Each unit uses a Fluid Circulative Bearing rated for 800 to 1900 RPM with airflow of 55 to 60 CFM and noise between 17 and 31 dB. A bundled controller manages lighting and power for the entire array.

Builders who want clean cable routing

The daisy-chain design suits builders who prefer a single connection point and synchronised lighting across multiple fans. Buyers who need independent fan headers for each unit or who cannot accommodate the 122.8 by 122.4 mm frame dimensions should look at alternative solutions.

Sixteen-fan controller limit

Each controller port supports up to four fans and the device can handle sixteen fans in total, so the six-pack leaves headroom for expansion. Verify that your motherboard ARGB header or the included controller matches your preferred control method before purchase.

Pluspunten

  • Modular snap-together design cuts cable clutter and screw count
  • 32 ARGB LEDs per fan with front and rear illumination
  • PWM speed range 800 to 1900 RPM for quiet or high airflow
  • Fluid circulative bearing rated for long life at 17 to 31 dB
  • Controller handles up to 16 fans across four ports

Specificaties

TypeCase Fan
CompatibilityCase
Bearing TypeFluid Circulative Bearing(FDB)
RPM800~1900 RPM
Air Flow55-60 CFM
Noise Level17-31 DB
ColorBlack
LEDARGB
Package Contents122.8X 122.4X2 5MMX 3PCS

Vragen over dit artikel

How loud is the 1900 RPM maximum speed compared with the 800 RPM minimum?

The fan runs at 31 dB at 1900 RPM and 17 dB at 800 RPM, so all-day operation stays within that range.

What motherboard headers are needed for the PWM fans and the 5 V ARGB lighting?

Each fan needs a 4-pin PWM header for speed control and a 5 V 3-pin ARGB header for lighting; the included controller can handle up to 16 fans across its ports.

Will the 122.8 × 122.4 × 25 mm frame fit alongside older 120 mm fans that use standard screw spacing?

Yes, the frame matches the standard 120 mm mounting holes, so it aligns with older fans using the same screw pattern.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.