Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Spool of grey 3D printing filament on a plastic reel

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g Basalt Grey45 3d printers accessory

SKU CH-5JSJ-2WAWY

PETG-based filament combining ABS toughness with PLA ease, low warp, strong layer adhesion, recyclable, prints odour-free on 2.85 mm, 750 g spool

  • ColorGray
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • Easy printing with no unpleasant fumes or odors
  • Strong, tough filament with naturally glossy finish
  • Adheres to bed surfaces using only a little gluestick
  • Pairs with Scaffold support for clean breakaway support removal

Filament Diameter and Weight

This genuine E3D spoolWorks EDGE filament comes on a 750 g spool with a 2.85 mm diameter. It is a PETG-based material modified for exceptional toughness and resilience. The formulation combines ABS-like durability with PLA-like ease of printing. Parts printed with it show nearly equal strength across and between layers.

Low-Warp Printing and Bed Adhesion

Makers who want strong functional parts without dealing with significant warp will appreciate the super-low contraction. It adheres well to bed surfaces using only a small amount of gluestick. Users who require a filament that prints completely without any bed preparation or who need a non-PETG material should consider other options.

Printer Compatibility Check

Verify that your 3D printer accepts 2.85 mm diameter filament before ordering. Confirm the extruder and hotend can reach the temperatures required for PETG-based materials. Ensure the spool dimensions suit your printer's filament holder or mounting system.

Pluspunten

  • Recyclable PETG-based material reduces environmental impact
  • Easy printing with no unpleasant fumes or odors
  • Strong, tough filament with naturally glossy finish
  • Adheres to bed surfaces using only a little gluestick
  • Pairs with Scaffold support for clean breakaway support removal

Specificaties

BrandE3D
ModelEdge
ColorGray
TypeFilament

Vragen over dit artikel

Does my printer need a 2.85 mm filament path to use this spool?

Yes, the filament diameter is 2.85 mm so your extruder and Bowden tube must accept that size.

Will the Basalt Grey45 material bond well to my existing glass bed with only a gluestick layer?

The manufacturer states it adheres effectively to bed surfaces with just a little gluestick, so a standard glass plate should work.

How can I verify the spoolWorks EDGE filament is printing correctly during the first few layers?

Look for smooth, glossy extrusion with no warping or odour, and check that layers fuse tightly with minimal stringing on overhangs.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.