Ebm-Papst
Ebm-Papst 8414NH case fan 80×80×25 mm 24 V 46.5 CFM 37 dB
80 mm axial fan moves 46.5 CFM at 3600 RPM with 37 dB noise on 24 V power
- RPM3600 RPM
- Air Flow46.5 CFM
- Noise Level37dB
- Dimensions80 X 80 X 25.4mm
- Reliable long-life cooling with ball-bearing motor
- Strong 46.5 CFM airflow at 3600 RPM
- Quiet 37 dB operation for low-noise builds
- Wide 18 V to 26 V input range for flexible 24 V systems
- Compact 80 × 80 × 25 mm frame fits tight chassis spaces
Compact 24 V axial fan for tight builds
The Ebm-Papst 8414NH is an 80 mm square axial fan built for 24 V DC systems that need directed airflow in confined spaces. It suits industrial enclosures, rack gear and small-form-factor PCs where a slim 25 mm profile is required.
Steady 3600 RPM output with ball-bearing durability
At the rated 24 V the fan holds a constant 3600 RPM, moving 46.5 CFM while producing 37 dB of noise. The ball bearing and 2.4 W power draw are rated for continuous operation between -4 °C and 70 °C, so airflow does not degrade during long duty cycles.
Replaces louder or shorter-life 80 mm sleeve fans
Builders swapping out sleeve-bearing units that have become noisy or failed gain the reliability of ball bearings and the safety of CE, CSA, UL and VDE approvals. The 310 mm lead length fits most chassis routing without extension cables.
Pluspunten
- Reliable long-life cooling with ball-bearing motor
- Strong 46.5 CFM airflow at 3600 RPM
- Quiet 37 dB operation for low-noise builds
- Wide 18 V to 26 V input range for flexible 24 V systems
- Compact 80 × 80 × 25 mm frame fits tight chassis spaces
Specificaties
| Brand | Ebmpapst |
|---|---|
| RPM | 3600 RPM |
| Air Flow | 46.5 CFM |
| Noise Level | 37dB |
| Dimensions | 80 X 80 X 25.4mm |
Vragen over dit artikel
How much noise and heat does the 8414NH produce when running continuously at 3600 RPM?
The fan runs at 37 dB and draws 2.4 W, so it adds minimal acoustic and thermal load during all-day operation.
What power source and mounting hardware must I already have to install this 24 V, 80×80 mm fan?
You need a 24 V DC supply (18 V to 26 V range) and four mounting holes for the 80 mm flange pattern; the 310 mm lead wires connect directly.
Will the 8414NH fit and cool effectively in an older case designed for 80 mm fans with 3-pin headers?
It matches the 80×80×25.4 mm footprint, but uses bare leads instead of a 3-pin connector, so an adapter or direct wiring is required.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001042BTC
Op voorraad