Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact USB duplicator with one source and nine target slots, slim silver finish

EZ Dupe, Inc.

EZ Dupe, Inc. MiniUSB Pro 1-to-9 USB Duplicator 2GB/min

SKU CH-ZK6Q-CAAQS

Copies up to nine USB flash drives simultaneously at 2 GB per minute without a computer

  • TypeUSB Flash Drive Duplicator
  • Target1 to 9
  • Supported MediaUSB Type IF-A 1.0 / 2.0 / 3.0 and Newer
  • Data Transfer Rate2GB/min
  • Data Source ROM1 USB Slot for Source Reading
  • Data Destination Burner9 USB Slots for USB to USB Copy

Target 1 to 09

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

Option MiniUSB Pro (Copy & Erase)

  • Copies nine USB drives simultaneously at 35 MB/s
  • Quick or sector-by-sector copy modes selectable
  • Quick and full erase modes sanitise media
  • Standalone operation requires no host computer
  • Compact 4.21" × 6.22" × 1" design for mobility

1-to-9 USB Duplicator

The EZ Dupe MiniUSB Pro is a standalone duplicator that copies one source USB flash drive to up to nine targets simultaneously. It accepts USB 1.0, 2.0 and 3.0 Type-A media and requires no host computer to operate. The unit is suited for IT departments, duplication service bureaus and anyone needing to deploy identical content across multiple drives quickly.

Sustained Copy and Erase Performance

The duplicator delivers a sustained transfer rate of 2 GB per minute, equivalent to approximately 35 MB per second, across all active target ports. Asynchronous operation lets each target start copying the moment a drive is inserted, so a finished drive can be swapped for a blank one without waiting for the whole batch to complete. Quick Copy duplicates only essential files, while Whole Media Copy performs a sector-by-sector clone; both modes maintain the rated throughput under continuous load.

USB Interface and Power Limits

The device relies on the USB Type-A interface, supporting the 1.0, 2.0 and 3.0 specifications for source and target drives. Power is drawn from an internal AC supply rated for 115 to 230 V at 50 or 60 Hz, so no external adapter is needed. Maximum copy speed is ultimately constrained by the slowest target drive connected, and the nine-port topology means total aggregate bandwidth is shared across all active slots.

Pluspunten

  • Copies nine USB drives simultaneously at 35 MB/s
  • Quick or sector-by-sector copy modes selectable
  • Quick and full erase modes sanitise media
  • Standalone operation requires no host computer
  • Compact 4.21" × 6.22" × 1" design for mobility

Specificaties

BrandEZ Dupe
ModelMiniUSB Pro
Part NumberDM-FU0-10V09B
TypeUSB Flash Drive Duplicator
Target1 to 9
Supported MediaUSB Type IF-A 1.0 / 2.0 / 3.0 and Newer
Data Transfer Rate2GB/min
Data Source ROM1 USB Slot for Source Reading
Data Destination Burner9 USB Slots for USB to USB Copy
Operating TypeStandalone
ConnectorUSB Type A
Dimensions (H x W x D)4.21" D x 6.22" W x 1" H
Load TypeTop Load
Power SupplyAC: 115-230 V, 50/60 Hz

Andere versies van dit model

Nog 3 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the MiniUSB Pro 1-to-9 duplicator generate noticeable heat or fan noise during continuous 2 GB/min copying?

The unit has no fan listed in its specifications; its compact 4.21" deep by 6.22" wide enclosure relies on passive cooling while powered from 115-230 V AC.

What must I already own to start duplicating with the 1-to-9 MiniUSB Pro?

You need a source USB flash drive and up to nine target USB flash drives, all with standard Type-A connectors compatible with USB 1.0, 2.0 or 3.0.

Will the duplicator copy older USB 1.0 flash drives at the same 2 GB/min rate as newer USB 3.0 drives?

The duplicator supports USB 1.0, 2.0 and 3.0 media, but the 2 GB/min (35 MB/s) maximum speed depends on each drive's own capability; slower drives will copy at their native rate.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.