GUDGA GXF-PRO 1TB M.2 2280 PCIe 4.0 NVME internal SSD with heatsink
- Internal Solid Stat…
- Consumer
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
GUDGA
A 512GB M.2 2280 PCIe 4.0 NVME SSD with heatsink delivering up to 6600MB/s read and 4400MB/s write for fast boot and load times
This GUDGA drive is a 512GB M.2 2280 PCIe 4.0 NVME SSD with a graphene heat dissipation patch. It delivers sequential read speeds up to 6600MB/s and write speeds up to 4400MB/s using 3D NAND flash. The 900TBW endurance rating supports heavy consumer workloads on desktop, laptop or PS5.
The single-sided M.2 2280 form factor fits standard slots and the pre-attached heatsink removes the need for a separate thermal pad. Ensure the motherboard or console firmware is updated to support PCIe 4.0 speeds. Over-tightening the retention screw can warp the PCB and cause detection failures.
This drive suits gamers and creators who need fast NVME storage with integrated cooling for a PS5 or compact PC build. Buyers requiring higher capacities or drives without a heatsink for tight clearance should consider other models. The operating range of 0°C to 70°C covers typical consumer environments.
| Brand | GUDGA |
|---|---|
| Series | GXF-PRO |
| Model | GXF-Q-512-PRO-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | 6600MB/s |
| Max Sequential Write | 4400MB/s |
| Terabytes Written (TBW) | 900TB |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Manufacturer Recertified | Yes |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Run a PCIe 4.0 NVMe benchmark such as CrystalDiskMark on a PCIe 4.0 x4 slot; sequential read should approach 6600MB/s and write 4400MB/s when the drive is at operating temperature.
The drive includes a pre-fitted graphene heatsink; you only need a motherboard or PS5 slot that supports M.2 2280 PCIe 4.0 x4 NVMe and a retaining screw.
The 512GB model gives 900TBW endurance and 6600MB/s reads; choose a larger GXF-PRO capacity only if you need more space for media libraries.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?