Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
A rectangular ATX power supply unit with a metal casing and a single cooling fan visible on one side

Gulfe

Gulfe ATX Power Supply for HP Pavilion Elite H8-1210 HPE 377A

SKU CH-5F7D-5DJ28

ATX power supply with reduced depth fits HP Pavilion Elite H8-1210 and HPE 377A desktops, providing 24-pin, 4-pin, three SATA, two LP4 and one floppy connector

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX form factor fits HP Pavilion Elite H8-1210
  • Reduced 5.9" depth improves case compatibility
  • Over current and over power protection safeguards components
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • Hi-Pot tested with low ripple and noise

Replacement ATX Supply for HP Pavilion H8-1210

This Gulfe ATX power supply is built as a direct replacement for the HP Pavilion Elite H8-1210 desktop using the HPE 377A unit. It uses a reduced-depth chassis measuring 5.86 by 3.3 inches to fit the original mounting points. The unit weighs 2.5 and includes a single cooling fan. It accepts 115 or 230 V input at 47 to 63 Hz.

Owners of the exact H8-1210 chassis needing

This unit suits owners of the specific HP Pavilion Elite H8-1210 who need a new ATX supply with the same connector layout and reduced depth. Builders working in standard ATX cases, systems requiring a 24-pin motherboard connector without the 20+4 split, or configurations needing more than three SATA power leads should look at other models.

Three SATA drives plus legacy peripherals on +12V

The supply delivers +12V on two rails alongside +5V, +3.3V, -12V, -5V and +5V standby outputs. Connectors include one 24-pin ATX, one 4-pin P4 12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin. Hold-up time is rated at 17 ms minimum with a rise time under 70 ms.

Pluspunten

  • ATX form factor fits HP Pavilion Elite H8-1210
  • Reduced 5.9" depth improves case compatibility
  • Over current and over power protection safeguards components
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • Hi-Pot tested with low ripple and noise

Specificaties

BrandGulfe
TypeATX
Fans1
Weight2.5

Vragen over dit artikel

Does my HP Pavilion Elite H8-1210 motherboard accept the 24-pin ATX and 4-pin P4 connectors on this unit?

Yes, it ships with a 24-pin (20+4) ATX connector and a P4 4-pin 12 V connector, matching the H8-1210 board layout.

Will the reduced-depth 5.9-inch height and 3.4-inch width fit in my existing HPE 377A chassis alongside the current drive cage?

The shorter depth is designed for legacy HP cases like the HPE 377A, clearing standard drive cages that block full-length units.

How can I verify the +12 V rails are delivering stable power after installation?

Measure the +12 V1 and +12 V2 outputs with a multimeter under load; they should stay within ATX tolerance with ripple below spec.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.