Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver rectangular modular power supply unit with rear connector and front handle, designed for HP BladeSystem c7000 enclosure

HP

HP 499243-B21 2400W Modular AC Power Supply

SKU CH-W640-TMKXB MPN 499243-B21

A 2400W modular AC power supply for HP BladeSystem c7000 enclosures, operating at 200 V AC to 240 V AC with 92% efficiency

  • Maximum Power2400W
  • ModularModular
  • Input Voltage200 V AC to 240 V AC
  • Input Current12.60 A @220 V AC
  • FeaturesInput Voltage Type: AC Compatibility: HP BladeSystem c7000 E
  • 2400 W output powers dense blade workloads
  • Gold 92 % efficiency reclaims lost energy
  • Modular hot-plug design enables zero-downtime swaps
  • 200–240 V AC input matches global data-centre power
  • Purpose-built for HP BladeSystem c7000 enclosures

2400W modular AC supply for BladeSystem c7000

This hot-plug power module delivers up to 2400 W of AC power for HP BladeSystem c7000 enclosures. It operates on a 200 V to 240 V input range and draws 12.60 A at 220 V. The modular design allows tool-less insertion and removal while the enclosure remains powered.

Gold 92% efficiency under continuous load

Certified at 92 per cent efficiency, the unit reclaims power that would otherwise be lost as heat during sustained operation. This reduces overall enclosure power draw and thermal output when the chassis runs at high utilisation for extended periods.

Replaces lower-wattage or non-hot-plug modules

The 2400 W capacity supports fully populated blade configurations that smaller supplies cannot sustain. The jump is worth it when the enclosure demands maximum density and zero-downtime module swaps.

Pluspunten

  • 2400 W output powers dense blade workloads
  • Gold 92 % efficiency reclaims lost energy
  • Modular hot-plug design enables zero-downtime swaps
  • 200–240 V AC input matches global data-centre power
  • Purpose-built for HP BladeSystem c7000 enclosures

Specificaties

BrandHP
Model499243-B21
Maximum Power2400W
ModularModular
Input Voltage200 V AC to 240 V AC
Input Current12.60 A @220 V AC
FeaturesInput Voltage Type: AC
Compatibility: HP BladeSystem c7000 Enclosure
Verzendgewicht6.80 kg
Pakketafmetingen508 × 152 × 152 mm

Vragen over dit artikel

How much heat does the 2400W unit produce when running continuously at full load?

At 92% efficiency the supply converts most input power, leaving roughly 200 W of waste heat that the enclosure fans must remove around the clock.

What infrastructure must already be in place for this supply to operate?

It requires an HP BladeSystem c7000 enclosure and a 200 V AC to 240 V AC three-phase source capable of delivering 12.60 A at 220 V AC.

Will the module work alongside older power supplies already installed in the same c7000 chassis?

Yes, the hot-plug modular design lets it share the enclosure's power bus with existing supplies without shutting down the blade servers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.