HP
HP 7450PRO 15.36 TB NVMe 4.0 2.5" internal SSD
High-capacity 15.36 TB NVMe 4.0 internal SSD in a 2.5-inch form factor delivering up to 6800 MB/s reads and 5600 MB/s writes
- Massive 15.36 TB capacity stores huge datasets
- PCIe 4.0 NVMe delivers 6800 MB/s sequential reads
- Sustained 5600 MB/s writes handle heavy write workloads
- 1 000 000 random read IOPS accelerates database queries
- 250 000 random write IOPS keeps latency low under load
High-capacity NVMe drive for enterprise storage
The HP 7450PRO is a 15.36 TB internal solid-state drive built on a PCI Express 4.0 interface with NVMe protocol. It delivers sequential reads up to 6800 MB/s and writes up to 5600 MB/s in a 2.5-inch form factor. The drive is designed for workloads that demand sustained throughput and high endurance. Random 4 KB performance reaches 1 000 000 IOPS read and 250 000 IOPS write.
Suits read-intensive servers; not for limited bays
This drive fits servers and storage arrays that can accept a 2.5-inch PCIe NVMe device and need maximum capacity in a single slot. It is less suitable for systems that only provide M.2 slots or that require a different physical connector. Buyers needing a lower-capacity or differently shaped drive should consider other options.
15.36 TB capacity decides fit
The single specification that determines suitability is the 15.36 TB capacity. If the application requires this exact raw capacity in one 2.5-inch NVMe 4.0 drive, the 7450PRO matches; otherwise a different capacity point is needed.
Pluspunten
- Massive 15.36 TB capacity stores huge datasets
- PCIe 4.0 NVMe delivers 6800 MB/s sequential reads
- Sustained 5600 MB/s writes handle heavy write workloads
- 1 000 000 random read IOPS accelerates database queries
- 250 000 random write IOPS keeps latency low under load
Specificaties
Voor dit artikel zijn nog geen specificaties gepubliceerd.
Vragen over dit artikel
How do I install the 2.5" 7450PRO in a PCIe 4.0 slot, and which step do people get wrong?
Mount the 2.5-inch drive in a U.2 or PCIe carrier, connect it to a PCIe 4.0 x4 backplane, and enable NVMe in BIOS; the common mistake is leaving the slot at PCIe 3.0 speed, which caps the 6800 MB/s read and 5600 MB/s write.
What maintenance or replacement will the 15.36 TB 7450PRO need later?
No scheduled maintenance is required; monitor SMART health attributes and replace the drive once its endurance rating is reached or if reallocated sectors appear.
What limit appears first on the 7450PRO during sustained heavy writes?
The sustained write throughput settles at 5600 MB/s, and the 250000 random 4 KB write IOPS ceiling is reached before thermal throttling engages.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
