Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

HP

HP Aruba X371 12VDC 250W Power Supply JL085A

SKU CH-G8MG-VTD40

Proprietary 250 W power module accepting 120 V or 230 V AC input for Aruba X371 switches

  • TypeProprietary Power Supply
  • Reliable 250 W output for Aruba 371 switches
  • Auto-ranging 120 V or 230 V AC input for global use
  • Proprietary form factor ensures direct compatibility with JL085A slot
  • Hot-swap power module design minimises network downtime during maintenance

HP Aruba X371 250W Proprietary Power Module

The HP Aruba X371 is a proprietary 250 watt power module designed for compatible Aruba network switches. It delivers 12 V DC output to support switch operation in enterprise environments. This new unit carries part number JL085A and serves as a direct replacement or spare for supported hardware. It is not intended for standard ATX desktop builds or generic server chassis.

120-230 V AC Input with 12 V DC Output

The supply accepts 120 V AC or 230 V AC mains input and converts it to a 12 V DC rail rated at 250 W. Normal operating thermals and acoustic levels are governed by the host switch chassis and its integrated cooling design. Power draw scales with the connected switch load up to the 250 W maximum. Builders needing redundant or higher-capacity modules should verify compatibility with their specific switch model.

Pluspunten

  • Reliable 250 W output for Aruba 371 switches
  • Auto-ranging 120 V or 230 V AC input for global use
  • Proprietary form factor ensures direct compatibility with JL085A slot
  • Hot-swap power module design minimises network downtime during maintenance

Specificaties

TypeProprietary Power Supply

Vragen over dit artikel

How do I install the JL085A power supply into an Aruba X371 switch, and which step is often missed?

Slide the module into the chassis until the latch clicks, then tighten the captive screws to secure it; the step often missed is fully tightening those screws so the unit seats properly on the 12 V DC bus.

What maintenance will the JL085A power supply need during its service life?

Clean the intake vents periodically to prevent dust build-up on the internal fan, and replace the unit if the front LED shows a fault or the switch logs a 12 V DC rail failure.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.