Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 2U rack server chassis with front drive bays and rail kit

HPE

HPE ProLiant DL380 Gen11 2U Rack Server Dual Xeon 4410y 12-Core 2.00GHz 1TB DDR5 30.72TB SATA SSD

SKU CH-3D0G-D2ZGX

Dual Xeon Silver 4410y 12-core processors, 1TB DDR5 memory and 30.72TB enterprise SATA SSD storage in a 2U rack server

  • Dual Xeon Silver 4410y 12-core CPUs reach 3.90 GHz turbo for peak compute
  • 1TB DDR5-4800 ECC memory across 16 modules handles large datasets
  • 72TB enterprise SATA SSD storage in 8 drives for fast capacity
  • Hot-swap redundant power supplies keep the server running during maintenance
  • iLO 6 remote management enables lights-out control and provisioning

HPE ProLiant DL380 Gen11 2U Server

The HPE ProLiant DL380 Gen11 is a 2U rack-mount server system built for hybrid enterprise environments. It ships with dual Xeon Silver 4410y processors, each delivering 12 cores at 2.00 GHz with up to 3.90 GHz turbo. The configuration includes 1TB of DDR5-4800 ECC buffered memory across 16 modules and 30.72TB of enterprise SATA SSD storage using eight 3.84TB drives.

Suited for virtualisation and database workloads

This server suits organisations running virtualised workloads, databases or multiple simultaneous applications that benefit from dual-socket performance and large memory capacity. Hot-swappable redundant power supplies and the iLO 6 remote management controller support continuous operation. Buyers who need higher core counts per socket, faster storage interfaces or GPU-accelerated compute should evaluate alternative configurations.

Storage capacity and interface decide fit

The single specification that decides suitability is the 30.72TB of enterprise 2.5-inch SATA III 6Gb/s SSD storage paired with the MR408i-o Gen11 storage controller. This SATA-based array determines maximum throughput and latency for the installed drives. If your workload demands a different storage protocol or higher IOPS, the installed controller and drive set will not meet that requirement.

Pluspunten

  • Dual Xeon Silver 4410y 12-core CPUs reach 3.90 GHz turbo for peak compute
  • 1TB DDR5-4800 ECC memory across 16 modules handles large datasets
  • 72TB enterprise SATA SSD storage in 8 drives for fast capacity
  • Hot-swap redundant power supplies keep the server running during maintenance
  • iLO 6 remote management enables lights-out control and provisioning

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

How do I install the 16 DDR5 modules and 8 SATA SSDs that ship separately?

Populate all 16 DDR5 slots with the 64GB modules following the CPU-channel sequence in the service guide, then slide each 2.5-inch SSD into the front hot-plug bays until the latch clicks; the MR408i-o controller will detect them on first boot.

Which components will need replacement first under continuous operation?

The dual hot-swap power supplies and the 8 enterprise SATA SSDs are the only field-replaceable parts rated for wear; fans and the iLO 6 module are not user-serviceable.

What performance limit appears first when both Xeon 4410y CPUs run at 3.90 GHz turbo for hours?

The 30MB cache per processor and the DDR5-4800 memory bandwidth become the bottleneck before the PCIe Gen5 lanes or the 4GB RAID cache saturate.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.