Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
HPE ProLiant ML350 Gen11 4U tower server, silver finish, front drive bays visible

HPE

HPE ProLiant ML350 Gen11 4U Tower Server Dual Xeon 4410y 12-Core 2.00 GHz 1TB DDR5 61.44TB SAS SSD

SKU CH-D16E-GG1Q2

4U tower server with dual 12-core Xeon Silver 4410y CPUs, 1 TB DDR5 ECC memory, and 61.44 TB enterprise SAS SSD storage

  • TypeTower
  • CPU TypeIntel Xeon
  • MAX Processors2
  • Memory TypeDDR5
  • Max Memory Capacity1TB
  • Dual Xeon Silver 4410y 12-core CPUs boost multi-thread throughput
  • 1TB DDR5-4800 ECC memory scales demanding virtualised workloads
  • 44TB enterprise SAS SSD array delivers high-capacity low-latency storage
  • Hot-swap redundant power supplies maintain uptime during maintenance
  • iLO 6 remote management simplifies server provisioning and monitoring

Hybrid-Ready 4U Tower Server

The HPE ProLiant ML350 Gen11 is a dual-processor tower server built for hybrid environments. It ships with two Xeon Silver 4410y 12-core CPUs running at 2.00 GHz with up to 3.90 GHz turbo and 30MB cache. The system includes 1TB of DDR5-4800MHz ECC buffered memory across 16 modules and 61.44TB of enterprise SAS SSD storage on eight 7.68TB 2.5-inch drives.

Suited for Virtualised Workloads.

This server suits organisations running database applications, virtualisation platforms or heavy concurrent workloads that need redundant power and remote management via iLO 6. It is not for buyers who need a ready-to-run system; the memory and drives are supplied separately and require installation before use. Teams without in-house hardware integration resources should plan for that step.

Component Installation Required

Installing the 16 DDR5 modules and eight hot-swap SAS SSDs follows normal tower-server procedures using the front drive bays and accessible memory slots. The MR408i-o storage controller and embedded 4-port 1GbE OCP3 adapter are pre-integrated. The main risk is configuration errors during the initial RAID setup or iLO 6 network provisioning if the installer skips the Intelligent Provisioning guided workflow.

Pluspunten

  • Dual Xeon Silver 4410y 12-core CPUs boost multi-thread throughput
  • 1TB DDR5-4800 ECC memory scales demanding virtualised workloads
  • 44TB enterprise SAS SSD array delivers high-capacity low-latency storage
  • Hot-swap redundant power supplies maintain uptime during maintenance
  • iLO 6 remote management simplifies server provisioning and monitoring

Specificaties

TypeTower
CPU TypeIntel Xeon
MAX Processors2
Memory TypeDDR5
Max Memory Capacity1TB

Vragen over dit artikel

What CPU sockets must my motherboard provide to use the dual Xeon Silver 4410y processors?

This server system includes both processors already installed; no separate motherboard or socket purchase is needed.

Will the MR408i-o storage controller recognise my existing 12 Gb/s SAS drives?

The MR408i-o Gen11 controller supports 12 Gb/s SAS SSDs, so your current 12 Gb/s SAS drives will be detected and usable.

How can I verify the 1 TB DDR5-4800 memory is running at the correct speed after installation?

Check the iLO 6 System Information page or the BIOS memory configuration screen; both report the operating frequency of each installed DIMM.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.