Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular metal ATX power supply unit with 24V 2.5A 60W label

KHACHIMO

KHACHIMO 24V 2.5A 60W ATX LED Power Supply H60W-SD-24

SKU CH-YH7Y-R4KMR

ATX power supply delivers 24 volts at 2.5 amps for 60 watts to LED systems

  • TypeATX
  • Delivers stable 24 V output for LED systems
  • 60 W capacity supports continuous 2.5 A load
  • ATX form factor fits standard chassis
  • Tested working before shipment ensures reliability
  • Quality construction provides dependable long-term operation

Purpose & Audience

This KHACHIMO ATX power supply delivers 24V at 2.5A for a total of 60W. It is built for LED lighting systems and similar low-voltage DC loads that require a standard ATX form factor.

Who It Suits

Installers replacing an existing 24V 60W ATX brick in signage, display or industrial lighting will find a direct match. Builders needing adjustable voltage, higher current, or multiple output rails should look at a different unit.

Deciding Specification

The fixed 24V 2.5A 60W output rating is the single figure that determines whether this supply matches the load. Verify the device draws no more than 2.5A at 24V before purchasing.

Pluspunten

  • Delivers stable 24 V output for LED systems
  • 60 W capacity supports continuous 2.5 A load
  • ATX form factor fits standard chassis
  • Tested working before shipment ensures reliability
  • Quality construction provides dependable long-term operation

Specificaties

TypeATX

Vragen over dit artikel

How do I install the 24V 2.5A 60W ATX power supply and what step is often missed?

Mount the unit in an ATX bay, connect the 24V output leads to the LED load, then plug the AC cord into a grounded outlet; the step often missed is verifying the load does not exceed 2.5A before powering on.

What maintenance or replacement will the H60W-SD-24 need over time?

Keep the ventilation openings clear of dust and check the output voltage annually with a multimeter; replace the unit if the 24V rail drifts or if the supply fails to start under a 2.5A load.

What limit appears first when the 60W supply runs continuously at full load?

The 2.5A current limit on the 24V rail is reached first; sustained operation at 60W leaves no headroom, so the protection circuit will shut the unit down if the load spikes above 2.5A.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.