Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular DC boost power module with metal casing and connector pins

KHACHIMO

KHACHIMO DC Boost Power Module FP2 42-75V 380/1350 241115.615

SKU CH-2WVQ-Z44N2

DC boost module converts 42–75 V input to 380/1350 output for ELTEK 241115.615 systems

  • TypeATX
  • DC-to-DC boost conversion for 42-75 V input range
  • Tested working unit ensures reliable operation
  • Good-quality construction supports continuous 380 W output
  • Peak capacity of 1350 W handles demanding load spikes

DC Boost Module for ELTEK Systems

This KHACHIMO DC boost power module replaces the ELTEK 241115.615 FP2 unit. It accepts a 42-75V DC input and delivers a 380/1350 output rating. The module is supplied new and tested working for immediate installation. It serves as a direct replacement for compatible ELTEK power systems.

Upgrade for Failed or Ageing FP2 Modules

The module restores power conversion in systems where the original FP2 unit has failed or drifted out of specification. It is not suitable for builds requiring a different input voltage range or output rating. Buyers needing alternative DC/DC topologies or form factors should verify compatibility before purchase.

Pluspunten

  • DC-to-DC boost conversion for 42-75 V input range
  • Tested working unit ensures reliable operation
  • Good-quality construction supports continuous 380 W output
  • Peak capacity of 1350 W handles demanding load spikes

Specificaties

TypeATX

Vragen over dit artikel

What are the input and output voltage ranges for the ELTEK 241115.615 FP2 module?

The module accepts a DC input between 42 V and 75 V and can deliver up to 1350 W output power.

How is the FP2 boost module installed in an ATX chassis, and what step is often missed?

Slide the unit into the ATX power-supply bay, secure it with the mounting screws, then connect the DC input leads — forgetting to tighten the screw terminals causes intermittent operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.