Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Metal enclosed power supply unit with side ventilation slots and terminal block connections

KHACHIMO

KHACHIMO MPS-200-24 24V 8.4A 200W power supply

SKU CH-087N-4AGSQ

A 200 W ATX power supply delivering 24 V at 8.4 A for industrial or medical modules

  • TypeATX
  • 24V 8.4A output powers industrial and medical equipment
  • 200W capacity supports demanding continuous loads
  • ATX form factor fits standard mounting points
  • Tested working to confirm reliable operation

Industrial power module for fixed-voltage systems

The KHACHIMO MPS-200-24 delivers a regulated 24 V output at 8.4 A for equipment that requires a steady 200 W supply. It is built to ATX form factor dimensions and suits industrial or medical devices that depend on a single stable rail. Each unit is tested before shipment to confirm correct operation. Buyers who need adjustable voltage or multiple output rails should look elsewhere.

Thermals noise and power draw in normal use

The module operates within its 200 W rating using the cooling method appropriate to its ATX chassis integration. Acoustic output will depend on the host system airflow rather than an onboard fan curve. Power draw from the mains matches the load presented by the connected equipment up to the rated limit. No efficiency certification or standby consumption figure is supplied.

Pluspunten

  • 24V 8.4A output powers industrial and medical equipment
  • 200W capacity supports demanding continuous loads
  • ATX form factor fits standard mounting points
  • Tested working to confirm reliable operation

Specificaties

TypeATX

Vragen over dit artikel

How do I install the KHACHIMO MPS-200-24 into a standard ATX chassis?

Mount the unit using the standard ATX screw pattern, connect the 24 V output leads to your load, then wire the AC input to a suitably rated mains connector; the step often missed is verifying the 8.4 A current limit matches the downstream device before powering on.

What maintenance will the MPS-200-24 require over its service life?

Periodically inspect the fan intake for dust buildup and clean with low-pressure air; check that output terminals remain tight and that the 24 V rail stays within tolerance under the 8.4 A load.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.