Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
KHACHIMO ATX power supply unit in metal casing

KHACHIMO

KHACHIMO PAC2000S12-B1 2000W 12V 6A ATX power supply

SKU CH-SEB6-ABY15

High-output ATX power module delivers 2000 W at 12 V with a 6 A rating for demanding builds

  • TypeATX
  • Delivers 2000 W continuous power for demanding builds
  • 12 V rail supplies 6 A to feed CPU and GPU
  • ATX form factor fits standard desktop chassis
  • Tested and verified working before shipment
  • First listed by manufacturer in April 2024

Product Identity

The KHACHIMO PAC2000S12-B1 is a 2000W ATX power supply delivering 12V at 6A. It is built for desktop systems that require a high-wattage unit in the standard ATX form factor. The module is supplied new and has been test-worked by the manufacturer.

Capacity and Headroom

Rated at 2000W, the unit provides substantial headroom for power-hungry components such as multiple graphics cards or dense storage arrays. The single 12V rail at 6A sets the practical limit for 12V-dependent loads; builds drawing more current on that rail will exceed the module's capability.

Thermals Noise and Power

Normal operation stays within ATX thermal envelopes, so case airflow designed for standard power supplies is sufficient. Fan noise scales with load but remains comparable to other 2000W units under typical desktop workloads. Power draw from the wall matches the connected system demand up to the 2000W rating.

Pluspunten

  • Delivers 2000 W continuous power for demanding builds
  • 12 V rail supplies 6 A to feed CPU and GPU
  • ATX form factor fits standard desktop chassis
  • Tested and verified working before shipment
  • First listed by manufacturer in April 2024

Specificaties

TypeATX

Vragen over dit artikel

Will the PAC2000S12-B1 fit a standard ATX case and connect to older 12 V components?

It follows the ATX form factor and delivers 12 V at 6 A, so it matches standard mounting points and legacy 12 V rails.

How can I confirm the PAC2000S12-B1 is operating correctly after installation?

The unit is test-working from the factory; verify the 12 V output with a multimeter or motherboard monitor once powered on.

What comes with the PAC2000S12-B1 and what must I source separately?

The package contains the ATX power module itself; mounting screws and any extra cables are not included and must be bought separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.