Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular silver metal ATX power supply unit with ventilation grilles and rear connector panel

KHACHIMO

KHACHIMO PBA1500F-48 power supply 100-240V 50-60Hz 19A 48V 35A

SKU CH-4T9D-S5BYB

Industrial power module delivers 48 V at 35 A with 100-240 V input and 1500 W capacity

  • TypeATX
  • Global 100-240V input fits any mains supply
  • 48V 35A output delivers 1500W for heavy loads
  • ATX form factor suits standard industrial chassis
  • Tested working and built with quality components

Industrial 48V power module

The KHACHIMO PBA1500F-48 is an ATX-form-factor power supply rated for 1500 W output at 48 V and 35 A. It accepts a universal 100-240 V input at 50-60 Hz with a 19 A draw, making it suitable for industrial control equipment that requires a single high-current rail. The unit is supplied new and has been tested for reliable operation.

Suited for fixed 48V DC loads

This module fits systems designed around a 48 V DC bus where a single regulated output is sufficient. It is not appropriate for builds that need multiple voltage rails or standard PC motherboard connectors. Buyers needing auxiliary voltages or modular cabling should consider alternative units.

Pluspunten

  • Global 100-240V input fits any mains supply
  • 48V 35A output delivers 1500W for heavy loads
  • ATX form factor suits standard industrial chassis
  • Tested working and built with quality components

Specificaties

TypeATX

Vragen over dit artikel

What ATX mounting dimensions does the PBA1500F-48 require?

This unit follows the standard ATX form factor, so it fits any chassis with ATX mounting holes and the usual rear cut-out for the AC inlet and power switch.

How is the PBA1500F-48 installed, and what step is often missed?

Secure the supply with four ATX screws, connect the 100-240 V AC input to the IEC inlet, then attach the 48 V DC load wires to the output terminals; the step most often missed is tightening the DC terminal screws to the specified torque so the 35 A connection stays secure.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.