Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 168-pin DIMM module with black memory chips and gold edge contacts

Kingston Technology Corp.

Kingston Technology Corp. 512 MB DIMM 168-pin SDRAM 133 MHz PC133 CL3 3.3 V registered ECC desktop RAM

SKU CH-XZZD-28Q98

512 MB registered ECC SDRAM DIMM running at 133 MHz with CL3 timing on a 168-pin 3.3 V interface

  • 512 MB capacity supports larger workloads
  • 133 MHz PC133 speed matches legacy system requirements
  • Registered ECC design improves data integrity
  • 168-pin DIMM fits compatible desktop motherboards

512 MB PC133 Registered ECC DIMM

This Kingston module provides 512 MB of SDRAM on a 168-pin DIMM running at 133 MHz with CL3 latency and 3.3 V operation. It is a registered ECC stick designed for desktop systems that require error-correcting code memory with a register buffer. The PC133 specification suits legacy platforms built around this memory standard.

Suits owners of legacy desktops needing registered

This module fits systems that specifically accept registered ECC SDRAM DIMMs at 133 MHz. It is not suitable for motherboards that only support unbuffered non-ECC memory or those requiring different pin counts, voltages, or memory technologies. Builders working on modern platforms should look elsewhere.

Pluspunten

  • 512 MB capacity supports larger workloads
  • 133 MHz PC133 speed matches legacy system requirements
  • Registered ECC design improves data integrity
  • 168-pin DIMM fits compatible desktop motherboards

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Does this 512 MB registered ECC module require a motherboard with 168-pin DIMM slots and 3.3 V SDRAM support?

Yes, the module uses a 168-pin DIMM form factor and operates at 3.3 V, so the motherboard must provide matching slots and voltage for SDRAM memory.

Can I mix this PC133 CL3 registered ECC stick with unbuffered non-ECC SDRAM already in my system?

No, registered ECC modules cannot be combined with unbuffered non-ECC memory; the motherboard chipset and BIOS must support registered ECC operation for all installed sticks.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.