BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Kingston Technology Corp.
Dual-channel 32 GB DDR5 kit running at 7200 MT/s with CL38 timings and RGB lighting
This kit provides 32 GB across two 16 GB DDR5 modules rated at 7200 MT/s with CL38 timings. It targets Intel 500, 600 and 700 series platforms including Z590, Z690, Z790 and B660 chipsets. The dual-channel layout suits high-performance gaming and workstation builds that need responsive memory bandwidth.
Operating at 1.45 V with XMP 3.0 profiles, the modules run at 38-44-44-84 timings under continuous load. The voltage and latency figures indicate stability for extended gaming sessions or compute workloads rather than brief burst performance. Thermal headroom is managed through the integrated heatspreader design.
Silver and black aluminium heatspreaders cover each 288-pin DIMM while addressable RGB lighting adds visual customisation. The 1Rx8 organisation uses eight FBGA components per module for dense packaging. Installation follows standard DDR5 keying so the kit drops into compatible slots without extra cables or software beyond motherboard RGB control.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade |
| Model | KF572C38RSAK2-32 |
| Capacity | 32GB |
| Type | 288-Pin PC RAM |
| Speed | DDR5 7200 (PC5 57600) |
| CAS Latency | CL38 |
| Timing | 38-44-44-84 |
| Voltage | 1.45 V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Silver / Black |
| Features | Kingston Renegade KF572C38RSAK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-7200 CL38 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-7200 at a low latency timing of 38-44-44 at 1.45V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. |
| Recommend Use | High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel 700 Series / Intel B660 / Intel Compatible / Intel Z590 / Intel Z690 / Intel Z790 |
| LED Color | RGB |
| Verzendgewicht | 0.18 kg |
| Pakketafmetingen | 178 × 127 × 23 mm |
The modules run at 1.45 V with CL38 38-44-44-84 timings; sustained loads will raise temperatures, so ensure your case airflow reaches the silver-black heatsinks.
You need an Intel 500, 600 or 700 series board with a 288-pin DDR5 slot and XMP 3.0 support to enable the 7200 MT/s profile.
The on-board RGB is controlled through the motherboard's 5 V addressable header; compatibility depends on your board vendor's software, not on the memory itself.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?