Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 184-pin DDR SDRAM module, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR333X72C25/1G 1GB DDR 333 (PC 2700) ECC Unbuffered server RAM

SKU CH-N20T-8JK7C MPN KVR333X72C25/1G

1GB 184-pin DDR 333 (PC 2700) ECC unbuffered server memory with CL2.5 latency at 2.5V

  • Capacity1GB
  • Type184-Pin DDR SDRAM
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Voltage2.50V
  • ECCYes
  • Error-correcting code protects data integrity
  • DDR 333 PC 2700 speed suits legacy server boards
  • CAS latency 2.5 reduces access delay
  • 184-pin DDR SDRAM form factor fits compatible slots
  • Unbuffered design simplifies installation in supported systems

1GB DDR 333 ECC Unbuffered Server DIMM

This 1GB Kingston module is a 184-pin DDR SDRAM running at DDR 333 (PC 2700) with CL2.5 latency and 2.50V operation. It includes ECC error correction and ships without a heat spreader for standard server slots. The stick is supplied new and ready for installation.

Suits legacy servers needing ECC DDR 333 memory

Systems that specifically require 184-pin DDR 333 ECC unbuffered DIMMs can use this part for maintenance or capacity expansion. Builders whose platforms demand registered DIMMs, different pin counts, non-ECC memory, or other voltage levels should look at something else.

184-pin DDR SDRAM interface decides compatibility

The module fits only motherboards with 184-pin DDR slots keyed for 2.50V unbuffered ECC DDR 333 (PC 2700) memory. Verifying the slot type and ECC requirement against the system manual is the single step that confirms whether this DIMM will work.

Pluspunten

  • Error-correcting code protects data integrity
  • DDR 333 PC 2700 speed suits legacy server boards
  • CAS latency 2.5 reduces access delay
  • 184-pin DDR SDRAM form factor fits compatible slots
  • Unbuffered design simplifies installation in supported systems

Specificaties

BrandKingston
ModelKVR333X72C25/1G
Capacity1GB
Type184-Pin DDR SDRAM
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Voltage2.50V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Verzendgewicht0.05 kg
Pakketafmetingen159 × 46 × 8 mm

Vragen over dit artikel

Does my server motherboard need an 184-pin DDR slot for this 1GB module?

Yes, the KVR333X72C25/1G uses the 184-pin DDR SDRAM form factor and requires a matching DDR 333 (PC 2700) slot.

Will this CL2.5 ECC unbuffered stick run with older CL2 registered modules I already have?

Mixing unbuffered and registered DIMMs is not supported; the system will not POST if both types are installed together.

How can I confirm the module is detected at DDR 333 speed after installation?

Check the BIOS memory information or run a tool such as CPU-Z; it should report 1GB at 333 MHz with CL2.5 timings.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.