Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Lankki 24-piece 3D printer tool kit with brushes files pins scrapers tweezers and cutters

Lankki 3D Printer 24-Piece Tools Kit

SKU CH-AE7F-VATZF

A 24-piece kit with five needle files, cleaning pins from 0.2 mm to 0.4 mm, three brushes, wire cutters, tweezers and stainless scrapers for print removal and finishing

  • Type3d-printer-24pcs
  • Compatible System24 Pcs
  • Specification24 Pcs
  • Features24 Pcs
  • Three brass, nylon and steel brushes clean nozzles and parts without damage
  • Five needle files in assorted shapes refine wood, stone, metal, glass and plastic prints
  • Five cleaning pins sized 0.2 mm to 0.4 mm clear nozzles precisely
  • Flush cutter and tweezers trim wires and remove surplus filament easily
  • Two stainless scrapers slide under models to lift them off the build plate safely

Lankki 3D Printer 24-Piece Tools Kit

This kit supplies a complete set of cleaning and finishing tools for desktop 3D printer owners. It includes brushes, scrapers, files, tweezers and nozzle cleaning pins in a single package. Makers can handle post-processing tasks without sourcing individual items separately. The assortment suits hobbyists and small workshops alike.

Capacity and headroom

Five needle files cover varied shaping jobs on wood, stone, metal, glass, plastic and jewellery. Three brushes address unfinished metal, finished surfaces and stray filament in nozzles. Five cleaning pins at 0.2 mm, 0.25 mm, 0.3 mm, 0.35 mm and 0.4 mm clear common nozzle diameters. The flush cutter and tweezers manage wire, cable ties and consumable cleanup.

Stainless steel scrapers for model removal

Two thin stainless steel scrapers slide between the build plate and printed model to lift parts without damaging the substrate. This feature decides whether the kit matches a user who regularly removes finished prints. Buyers needing only nozzle maintenance may find the scrapers unnecessary.

Pluspunten

  • Three brass, nylon and steel brushes clean nozzles and parts without damage
  • Five needle files in assorted shapes refine wood, stone, metal, glass and plastic prints
  • Five cleaning pins sized 0.2 mm to 0.4 mm clear nozzles precisely
  • Flush cutter and tweezers trim wires and remove surplus filament easily
  • Two stainless scrapers slide under models to lift them off the build plate safely

Specificaties

BrandLankki
Model3d-printer-24pcs
Part Number3d-printer-24pcs
Type3d-printer-24pcs
Compatible System24 Pcs
Specification24 Pcs
Features24 Pcs

Vragen over dit artikel

Will the 0.2 mm to 0.4 mm cleaning pins clear nozzles on my existing printer?

The kit includes five pins sized 0.2 mm, 0.25 mm, 0.3 mm, 0.35 mm and 0.4 mm, covering the most common nozzle diameters so you can match the pin to your current hot-end.

How can I verify the brass, nylon and stainless-steel brushes are each doing their job?

After a print, run the brass brush on unfinished metal parts, the nylon brush on finished surfaces and the stainless-steel brush on the nozzle; each should remove residue without scratching the intended surface.

Which of the 24 pieces come in the box and what must I source separately?

The box contains three cleaning brushes, five needle files, five nozzle cleaning pins, a flush cutter, tweezers and a stainless-steel scraper — 24 tools total — with no extra items required for basic cleaning and finishing tasks.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.