Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 12VHPWR cable with dual 8-pin connectors, 3 ft length

Lian-Li 001 600W PCIe 5.0 12VHPWR Cable Corsair Type-4 Black

SKU CH-7GYT-2PTAQ

Delivers 600W PCIe 5.0 power to RTX 50, RX 7900 and RX 9070 graphics cards via a 16AWG tinned-copper cable that connects dual 8-pin PSU plugs to a 12+4-pin GPU connector for Corsair Type-4 power

  • TypeCable Connectors
  • ColorBlack
  • Length3 ft.
  • Connector Number1
  • Terminal GenderMale to Male
  • Specifications16awg Embossed Cable, RoHS, 12 volts, Atx, 16, 25, inches, B
  • Delivers stable 600W power for RTX 50 and RX 7900 series GPUs
  • Direct replacement cable for Corsair Type-4 PSUs including RM and AX series
  • 16AWG tinned copper wire improves heat dissipation and long-term reliability
  • Dual 8-pin to 12+4pin connector with secure clips prevents loose connections
  • Flexible 3 ft length simplifies installation and clean cable management

600W PCIe 5.0 Cable for Corsair PSUs

This 12VHPWR cable connects a Corsair Type-4 power supply to compatible graphics cards. It serves builders upgrading to RTX 50 or RX 7900 and RX 9070 series GPUs. The direct-replacement design removes the need for an adapter. It is not for owners of non-Corsair units or PSUs using a different pinout.

Sustained 600W delivery with 16AWG tinned copper

The 16AWG tinned copper conductors and embossed jacket are built for continuous 600W load rather than brief peaks. Heat dissipation is improved over thinner wires, helping stability during long gaming or rendering sessions. Secure clips on the 12+4Pin connector resist vibration-induced loosening. It does not suit systems needing more than the rated wattage.

Flexible 3 ft length aids cable management

The three-foot male-to-male cable bends easily for clean routing in tight chassis. Black colouring blends with most builds. Dual 8-pin PSU ends plug directly into Corsair RM, RMx, SF, AX and HX series units. Builders requiring a different PSU-side connector or a shorter run cannot use this cable.

Pluspunten

  • Delivers stable 600W power for RTX 50 and RX 7900 series GPUs
  • Direct replacement cable for Corsair Type-4 PSUs including RM and AX series
  • 16AWG tinned copper wire improves heat dissipation and long-term reliability
  • Dual 8-pin to 12+4pin connector with secure clips prevents loose connections
  • Flexible 3 ft length simplifies installation and clean cable management

Specificaties

BrandLian-Li
Model001
TypeCable Connectors
ColorBlack
Length3 ft.
Connector Number1
Terminal GenderMale to Male
Specifications16awg Embossed Cable, RoHS, 12 volts, Atx, 16, 25, inches, Black, 001
Features16awg Embossed Cable

Vragen over dit artikel

How does the 16AWG tinned copper construction handle heat when the cable runs at 600W all day?

The 16AWG tinned copper wire with embossing is designed for improved heat dissipation, helping the cable stay reliable during continuous 600W loads.

Which power supply must I already own for this cable to work as a direct replacement?

You need a Corsair Type-4 PSU such as the RM, RMx, SF, AX or HX series so the dual 8-pin connectors plug straight into the PSU side.

Will the 12+4Pin connector fit the older 8-pin PCIe port on my current graphics card?

No, the 12+4Pin connector is built for PCIe 5.0 GPUs like the RTX 50 series and RX 7900 or RX 9070 cards; it does not mate with legacy 8-pin ports.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.