Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
White LCD accessory kit with 9.2-inch IPS screen for O11 Vision-M case

Lian Li

Lian Li O11 Vision-M 9.2" LCD Accessory Kit White

SKU CH-4VMM-Z6HK3

A 9.2-inch IPS LCD kit replaces the motherboard divider with a 1920×462, 60 Hz display managed via L-Connect 3 software

  • Motherboard CompatibilityMicro-ATX / Mini-ITX

Option LCD Accessory Kit - White

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Sharp visuals from 1920x462 IPS panel
  • Smooth 60Hz refresh for fluid motion
  • Custom content via L-Connect 3 software
  • Fits Micro-ATX and Mini-ITX builds
  • Choice of black or white finish

LCD Accessory Kit for O11 Vision-M

This 9.2 inch IPS display kit replaces the motherboard divider inside the O11 Vision-M case. It adds a 1920 by 462 pixel screen directly above the Micro-ATX or Mini-ITX board. Builders who want an integrated status panel or custom artwork without external mounts will use this accessory.

Software-Driven Content Limits

The panel runs at 60 Hz and relies entirely on L-Connect 3 running on the host system to push images or video. No onboard storage or standalone controller exists, so the display goes dark before the operating system loads. Buyers who need early-boot diagnostics or a display that works without software cannot use this kit.

9.2 Inch 1920x462 IPS Panel

The single specification that decides fit is the 9.2 inch 1920 by 462 resolution IPS screen. It matches the exact cut-out of the O11 Vision-M divider and the mounting points supplied with that case. Any other chassis or divider size will not accept this module.

Pluspunten

  • Sharp visuals from 1920x462 IPS panel
  • Smooth 60Hz refresh for fluid motion
  • Custom content via L-Connect 3 software
  • Fits Micro-ATX and Mini-ITX builds
  • Choice of black or white finish

Specificaties

Motherboard CompatibilityMicro-ATX / Mini-ITX

Andere versies van dit model

Nog 1 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Should I choose the white or black version of the 9.2" LCD accessory kit?

Both colours share the same 9.2" IPS panel, 1920x462 resolution and 60Hz refresh rate; pick the finish that matches your build theme.

What does the 1920x462 resolution look like on the 9.2" screen inside a case?

The ultra-wide aspect ratio fits the divider slot, giving a crisp 60Hz canvas for custom images, animations or system stats via L-Connect 3.

How does the kit connect to the motherboard and what limits the display?

It mounts in the divider slot above the motherboard and runs off a USB header; the 60Hz panel and L-Connect 3 software define the refresh and content ceiling.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.