Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black rectangular wall-wart power adapter with fixed AC prongs and a thin DC cable ending in a 2.1 mm barrel plug

Line6

Line6 DC-1g 9V DC 500mA Power Supply 2.1mm Center Pin

SKU CH-NF1N-XX2CJ

9 V DC 500 mA power supply with 2.1 mm centre pin for XDS-Plus, XDR95, Relay G30, G50, G90, XD-V70, XD-V30 and M5 Stompbox Modeler

  • TypeAT
  • 9 V DC output powers compatible Line 6 gear reliably
  • 500 mA current rating meets the draw of listed pedals and receivers
  • 1 mm centre-positive barrel fits the specified X2, Relay and Stompbox models
  • AT-type construction delivers stable regulated power for stage and studio use

Compatible Line 6 Devices

This 9V DC power supply delivers 500mA through a 2.1mm centre-positive plug. It is designed for the XDS-Plus, XDR95, Relay G30, G50, G90, XD-V70, XD-V30 and M5 Stompbox Modeler units. Musicians using any of these pedal receivers or modelers can replace a lost or damaged adapter with this unit.

Simple Plug-In Installation

Connect the barrel connector to the device power jack and the mains plug to a wall socket; no tools or configuration are required. The most common issue is accidentally using a centre-negative or higher-voltage adapter, which can damage the pedal. Verify the 2.1mm centre-pin polarity before powering the unit.

Pluspunten

  • 9 V DC output powers compatible Line 6 gear reliably
  • 500 mA current rating meets the draw of listed pedals and receivers
  • 1 mm centre-positive barrel fits the specified X2, Relay and Stompbox models
  • AT-type construction delivers stable regulated power for stage and studio use

Specificaties

TypeAT

Vragen over dit artikel

How can I confirm the power supply is delivering the correct 9V DC 500mA output after connecting it?

The unit powers compatible Line 6 devices such as the Relay G30, G50, G90, XD-V70, XD-V30, M5 Stompbox Modeler, XDS-Plus and XDR95. If the connected device turns on and operates normally, the supply is working as intended.

What comes in the box and do I need any extra cables or adapters?

The package includes the DC-1g power supply with a fixed 2.1 mm centre-pin plug. No additional cables or adapters are required for the listed X2, Relay, XD-V and M5 units.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.