Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small rectangular OLED board with yellow and blue pixels and pin header

LORDWORLD

LORDWORLD 0.96 Inch OLED Display Module Yellow & Blue

SKU CH-PEJ8-785TE

A 0.96 inch OLED module with SPI and I2C interfaces and onboard voltage translation for Raspberry Pi and microcontrollers

  • Ultra-narrow bezel maximises viewable area on 0.96 inch OLED
  • Dual SPI and I2C interfaces simplify wiring for Raspberry Pi, Arduino and STM32
  • Onboard voltage translator eases connection to mixed-logic systems
  • Yellow and blue pixels give high-contrast graphics for status readouts
  • Online code examples accelerate development for supported platforms

Compact OLED Module for Embedded Projects

This 0.96 inch OLED display module from LORDWORLD targets makers and students building Raspberry Pi or Arduino projects. The ultra-narrow bezel and compact board size allow it to fit inside tight enclosures. Example code for Raspberry Pi, Arduino and STM32 platforms is available online to accelerate development.

Suits SPI or I2C Builds Not High-Resolution Needs

Developers who need a small monochrome status screen with either 4-wire SPI or I2C communication will find the dual-interface flexibility useful. The 28×64 pixel resolution and yellow-and-blue colour split limit the module to simple icons, text or graphs, so it is not suited for detailed graphics or video playback.

28×64 Pixel Resolution Defines the Use Case

The display matrix is 28 pixels wide by 64 pixels high, which determines how much information can be shown at once. That resolution is the single specification that decides whether the module can meet your project's visual requirements.

Pluspunten

  • Ultra-narrow bezel maximises viewable area on 0.96 inch OLED
  • Dual SPI and I2C interfaces simplify wiring for Raspberry Pi, Arduino and STM32
  • Onboard voltage translator eases connection to mixed-logic systems
  • Yellow and blue pixels give high-contrast graphics for status readouts
  • Online code examples accelerate development for supported platforms

Specificaties

BrandLORDWORLD

Vragen over dit artikel

Does the 4-wire SPI and I2C interface cap the maximum data rate I can achieve?

The 4-wire SPI and I2C interfaces provide fast data rates and better compatibility with Raspberry Pi, Arduino and STM32 platforms.

What physical space and mounting does the 28×64 module need?

The 0.96 inch OLED has an ultra-narrow bezel and compact 28 by 64 millimetre outline for tight enclosures.

How do I install the display and what step do people get wrong?

Connect via SPI or I2C, use the onboard voltage translator, then follow the online examples for Raspberry Pi, Arduino or STM32.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.