Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small square IPS LCD HAT with joystick and three buttons, 40-pin GPIO header visible

LORDWORLD

LORDWORLD 1.3inch IPS LCD HAT 240x240 SPI development board

SKU CH-XH5D-NPNHB

A 1.3‑inch IPS LCD HAT with 240×240 resolution, 65K colour, joystick, three buttons and ST7789 driver for Raspberry Pi 5, 4B, 3B+ and Zero via 40‑pin GPIO

  • Sharp 240x240 IPS panel with 65K colours for clear visuals
  • 3 inch compact HAT fits portable Raspberry Pi projects
  • Built-in joystick plus three buttons enable direct on-screen control
  • SPI link driven by ST7789 chip gives fast stable refresh
  • Standard 40-pin GPIO header works with Pi 5 4B 3B+ Zero

Portable Raspberry Pi Display HAT

This 1.3inch IPS LCD HAT adds a compact 240x240 colour screen to Raspberry Pi 5, 4B, 3B+ or Zero boards. It delivers 65K colours with a wide viewing angle for portable projects and interactive applications. The module mounts directly on the standard 40PIN GPIO header for quick integration.

Build Integration and GPIO Use

The HAT connects through the SPI interface using an onboard ST7789 driver chip for stable data transmission. It occupies the 40PIN header while leaving remaining GPIO pins accessible for other peripherals. This arrangement frees up USB ports and HDMI outputs for other hardware in space-constrained builds.

Bundled Development Resources

Included example code and setup documentation are tailored for Raspberry Pi 5 and compatible models. These resources accelerate prototyping for hobbyists, engineers and students building mini gaming systems, control menus or embedded HMI projects. Builders needing higher resolution or touch input will require a different display module.

Pluspunten

  • Sharp 240x240 IPS panel with 65K colours for clear visuals
  • 3 inch compact HAT fits portable Raspberry Pi projects
  • Built-in joystick plus three buttons enable direct on-screen control
  • SPI link driven by ST7789 chip gives fast stable refresh
  • Standard 40-pin GPIO header works with Pi 5 4B 3B+ Zero

Specificaties

BrandLORDWORLD

Vragen over dit artikel

What limits continuous operation of the 240x240 IPS panel on the HAT?

The 1.3 inch IPS LCD draws power from the Raspberry Pi GPIO header and uses the ST7789 driver over SPI; sustained use is limited by the Pi's 5 V rail current budget and the display's own 65K colour rendering load.

How much noise or heat does the ST7789-driven display add when running all day?

The display module has no fan or moving parts; it produces no audible noise and only minimal heat from the ST7789 driver and backlight during continuous SPI operation.

Which Raspberry Pi board must I already own to mount and drive this 40PIN GPIO HAT?

Any Raspberry Pi with a standard 40PIN GPIO header — Pi 5, Pi 4B, Pi 3B+ or Zero series — provides the mechanical mount and SPI pins required by the HAT.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.