Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small astronaut-shaped desktop device with 1.28 inch round LCD screen

LORDWORLD

LORDWORLD ESP32-S3 1.28inch AI DeepSeek XiaoZhi N16R8 Development Board Astronaut Clock Desktop Ornament

SKU CH-B2QF-FSWZW

ESP32-S3 development board with 1.28 inch LCD runs DeepSeek XiaoZhi AI voice chat and doubles as an astronaut clock desktop ornament

  • ESP32-S3 chip powers AI voice chat robot
  • 28 inch LCD shows astronaut clock visuals
  • N16R8 provides 16 MB flash and 32 MB PSRAM
  • Desktop ornament doubles as development board

ESP32-S3 development board with 1.28 inch LCD

This LORDWORLD board combines an ESP32-S3 microcontroller with a 1.28 inch display and N16R8 memory configuration. It runs the XiaoZhi AI voice chat firmware and doubles as an astronaut-themed desktop clock ornament. The hardware targets makers who want a ready-to-program IoT edge device with integrated screen and voice interaction.

Suited for hobbyists building voice-enabled

Makers seeking a compact ESP32-S3 platform with onboard LCD and pre-loaded AI voice software will find this board convenient. Developers who need a different screen size, alternative memory layout, or a bare module without the astronaut enclosure should look at other ESP32-S3 options.

Pluspunten

  • ESP32-S3 chip powers AI voice chat robot
  • 28 inch LCD shows astronaut clock visuals
  • N16R8 provides 16 MB flash and 32 MB PSRAM
  • Desktop ornament doubles as development board

Specificaties

BrandLORDWORLD

Vragen over dit artikel

Does the board need an external 5 V supply or can it run from a USB-C cable?

The ESP32-S3 development board is powered through its USB-C port, so a standard USB-C cable and any 5 V USB charger or computer port are sufficient.

Will the 1.28 inch LCD and N16R8 memory work with older ESP-IDF releases I already use?

The 1.28 inch display and N16R8 flash/RAM combination are supported in current ESP-IDF versions; older releases may lack the board definition and display driver, so updating the framework is recommended.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.