Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
A 4.3 inch touch LCD board in a plastic case with screw terminals

LORDWORLD

LORDWORLD ESP32-S3 4.3inch Touch LCD Development Board Type B with Case 800×480 IPS

SKU CH-TSTQ-4F2MZ

A 4.3 inch IPS touchscreen board with 800×480 resolution, 160° viewing angle, five-point capacitive touch, 32-bit dual-core processor, 2.4 GHz WiFi, BLE, CAN, RS485, I2C, isolated IO.

  • Wide 160° viewing angle with 4.3 inch IPS display
  • Responsive 5-point capacitive touch via I2C interface
  • Dual-core 32-bit processor with 2.4 GHz WiFi and BLE 5
  • Flexible integration using CAN, RS485, I2C and isolated IO
  • Bottom or back wiring with two screw terminal types included

IoT Edge Board with 4.3inch IPS Touch

The LORDWORLD development board integrates an ESP32-S3 dual-core processor with a 4.3inch IPS display at 800×480 resolution. It provides a 160° wide viewing angle and a 5-point capacitive touch panel driven over I2C. The board ships inside a plastic case and includes screw terminals for two wiring orientations.

Makers needing CAN and RS485 expansion

Engineers building industrial HMIs or DIN-rail gateways will appreciate the onboard CAN, RS485, I2C and isolated IO interfaces. Buyers who want more storage or a larger screen area should look at something else. Projects requiring cellular connectivity or Power-over-Ethernet are not served by this hardware.

Sustained operation with dual-core 32-bit LX7

The 32-bit LX7 dual-core processor maintains responsiveness during continuous UI updates and peripheral polling. WiFi at 2.4GHz and BLE 5 remain stable during long data-logging sessions. The included case aids heat dissipation so the board runs reliably in embedded enclosures.

Pluspunten

  • Wide 160° viewing angle with 4.3 inch IPS display
  • Responsive 5-point capacitive touch via I2C interface
  • Dual-core 32-bit processor with 2.4 GHz WiFi and BLE 5
  • Flexible integration using CAN, RS485, I2C and isolated IO
  • Bottom or back wiring with two screw terminal types included

Specificaties

BrandLORDWORLD

Vragen over dit artikel

What power supply do I need to run the 4.3inch 800×480 IPS display and ESP32-S3 board?

Provide a 5 V DC source capable of at least 1 A through the onboard USB-C connector; the board regulates power for the display and processor internally.

Can I keep my existing RS485 sensors and connect them to the CAN and RS485 ports on this board?

Yes, the board exposes both CAN and RS485 screw-terminal interfaces so legacy RS485 devices can be wired directly without extra converters.

How can I verify the 5-point capacitive touch and 160° viewing angle are working after I flash my firmware?

Run a touch calibration sketch that reports five simultaneous touch points, then view the IPS panel from extreme side angles — colours should stay consistent across the 160° range.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.