Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
LORDWORLD ESP32-S3 development board with 2 inch IPS touchscreen and OV5640 camera module

LORDWORLD

LORDWORLD ESP32-S3-Touch-LCD-2-C Development Board 240×320 IPS 262K Colour OV5640 Camera

SKU CH-VWG7-6W54W

A compact ESP32-S3 development board with a 240×320 IPS touch display, TF card slot and an OV5640 5 MP camera for imaging projects

  • IPS panel delivers 262K colours with wide viewing angles
  • 240 by 320 pixel capacitive touchscreen driven by ST7789T3 and CST816D
  • Onboard camera interface plus TF card slot for storage expansion
  • Includes OV5640 5MP camera module for image capture and video monitoring
  • Supports ESP-IDF and Arduino IDE with comprehensive SDK and tutorials

ESP32-S3 Touch LCD Development Board

The LORDWORLD ESP32-S3-Touch-LCD-2-C is a compact IoT edge device built around the ESP32-S3 microcontroller. It integrates a 240×320 IPS display with 262K colour depth, capacitive touch input, an OV5640 5MP camera module, and a TF card slot. The board supports development in ESP-IDF and Arduino IDE with extensive SDK resources and tutorials.

Check Power And Camera Compatibility

Verify that your power supply can deliver stable current for the ESP32-S3, display, and camera module during simultaneous operation. Confirm that any additional camera modules you intend to use match the OV2640 or OV5640 interface specifications supported by the onboard camera connector. Ensure your development environment is set up for ESP-IDF or Arduino IDE before starting.

Makers Building Camera-Enabled Touch Interfaces

This board suits developers creating portable image capture, video monitoring, or touch-controlled IoT prototypes who need an all-in-one module with display, touch, camera, and storage expansion. It is not for projects requiring higher-resolution displays, larger screens, or camera sensors beyond the OV2640 and OV5640 families. Builders needing wired Ethernet or cellular connectivity should look at other platforms.

Pluspunten

  • IPS panel delivers 262K colours with wide viewing angles
  • 240 by 320 pixel capacitive touchscreen driven by ST7789T3 and CST816D
  • Onboard camera interface plus TF card slot for storage expansion
  • Includes OV5640 5MP camera module for image capture and video monitoring
  • Supports ESP-IDF and Arduino IDE with comprehensive SDK and tutorials

Specificaties

BrandLORDWORLD

Vragen over dit artikel

What comes in the box with the LORDWORLD ESP32-S3-Touch-LCD-2-C board and do I need to buy a camera separately?

The board includes an OV5640 5MP camera module, so no separate camera purchase is required for image capture or video monitoring projects.

Which display specification should I rely on when choosing this 2-inch IPS panel?

The 240×320 pixel resolution with ST7789T3 driver and CST816D capacitive touch chip defines the usable screen area and touch response.

What does the 262K colour figure mean for graphics on this ESP32-S3 board?

The panel renders 262K colours, providing smooth gradients and readable text at wide viewing angles for GUI prototypes and sensor dashboards.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.