Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small green circuit board with a black camera module and 110° lens

LORDWORLD

LORDWORLD OV9281-110 Mono Camera Board 1280×800 110° FOV

SKU CH-5W5R-QGER0

Global-shutter mono camera board captures 1280×800 video at 110° FOV and plugs directly into most Raspberry Pi models

  • Global shutter removes jello effect on fast motion
  • 110° field of view captures wide scenes
  • 1280 × 800 resolution delivers 1 MP detail
  • Direct connection to Raspberry Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+
  • Extra FPC cable needed for Zero and Zero 2 W

Global-shutter mono camera board

The LORDWORLD OV9281-110 is a 1-megapixel mono camera module built for Raspberry Pi developers who need distortion-free imaging of fast motion. Its global shutter captures full frames at once, removing the rolling-shutter jello effect that skews high-speed subjects.

Thermals noise and power

The compact board draws minimal power from the Pi CSI connector and runs silently with no active cooling. Heat output stays low during extended capture sessions, making it suitable for enclosed robotics or drone payloads where airflow is limited.

110-degree field of view

The fixed 110-degree lens delivers a wide-angle view at 1280×800 resolution, ideal for navigation, tracking or inspection tasks that demand broad coverage. Buyers who need a narrower perspective or higher pixel count should consider a different module.

Pluspunten

  • Global shutter removes jello effect on fast motion
  • 110° field of view captures wide scenes
  • 1280 × 800 resolution delivers 1 MP detail
  • Direct connection to Raspberry Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+
  • Extra FPC cable needed for Zero and Zero 2 W

Specificaties

BrandLORDWORLD

Vragen over dit artikel

How do I install the OV9281-110 camera on a Raspberry Pi Zero 2 W?

An extra FPC cable is required for the Zero and Zero 2 W series; connect the camera to the Pi CSI port using that cable and enable the camera interface in raspi-config.

What maintenance will the global shutter sensor need over time?

The global shutter sensor has no moving parts, so no mechanical maintenance is required; keep the lens clean and ensure the FPC cable stays seated.

What limit appears first when capturing fast motion continuously at 1280×800?

The global shutter eliminates jello-effect, so the first limit is the host Pi’s CSI bandwidth and CPU encoding capacity at sustained high frame rates.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.