Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 3.5 inch low-profile internal hard drive 1.0 inch thick

Maxtor

Maxtor 4R080L0 80GB 5400 RPM 3.5 inch 1.0 inch internal hard drive

SKU CH-ZFEQ-SYY7P MPN 4R080L0

80 GB desktop drive spinning at 5400 RPM in a low-profile 1.0 inch 3.5 inch form factor

  • Capacity80GB
  • RPM5400 RPM
  • 80 GB capacity stores large media collections
  • 5400 RPM spindle delivers quiet desktop operation
  • 5 inch form factor fits standard drive bays
  • 0 inch low profile suits slim chassis builds
  • 133 MB/s UltraDMA interface enables fast data transfers

Maxtor 80GB DiamondMax 16 IDE drive

This Maxtor 4R080L0 is an 80GB desktop internal hard drive that spins at 5400 RPM. It uses the DiamondMax 16 platform with a 2MB buffer and connects through an ATA IDE UltraDMA 133 interface. The low-profile 3.5 inch form factor measures 1.0 inch in height. It is supplied new in retail or OEM packaging.

Suits legacy ATA IDE systems needing modest capacity

Builders repairing or upgrading older desktops that still have an ATA IDE controller will find the correct interface and physical size here. The 5400 RPM spindle speed and 80GB capacity match period-correct specifications for basic storage tasks. It is not suited for systems lacking an ATA IDE connection, nor for workloads demanding larger capacities or faster rotational speeds than 5400 RPM.

ATA IDE UltraDMA 133 interface decides compatibility

The single specification that determines whether this drive fits is the ATA IDE UltraDMA 133 interface. Verify that the motherboard or controller card provides a matching 40-pin IDE connector and supports UltraDMA 133 signalling. Without that interface the drive cannot be installed or used.

Pluspunten

  • 80 GB capacity stores large media collections
  • 5400 RPM spindle delivers quiet desktop operation
  • 5 inch form factor fits standard drive bays
  • 0 inch low profile suits slim chassis builds
  • 133 MB/s UltraDMA interface enables fast data transfers

Specificaties

Capacity80GB
RPM5400 RPM
Verzendgewicht0.51 kg
Pakketafmetingen146 × 102 × 25 mm

Vragen over dit artikel

How much heat and noise does the 5400 RPM spindle produce when the drive runs continuously?

The 5400 RPM motor keeps operating temperatures modest and acoustic output low, so the 80GB drive stays cool and quiet during all-day workloads.

Which motherboard connector and cable do I need to install this ATA IDE UltraDMA 133 drive?

A 40-pin IDE header and an 80-conductor UltraDMA cable are required for the 133 MB/s interface.

Will the 1.0 inch low-profile 3.5 inch form factor fit alongside standard-height drives in my existing cage?

Yes, the 1.0 inch z-height is narrower than full-height 3.5 inch units, leaving room for older drives in the same bay.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.