Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small rectangular E-Ink display HAT with 250x122 pixel screen and 40-pin header

MCDODO

MCDODO 2.13inch E-Ink Display HAT V4 250x122 SPI

SKU CH-PFC9-AXMMC

A 2.13-inch E-Ink HAT with 250×122 resolution, SPI interface, partial refresh and 40-pin GPIO for Raspberry Pi and other 3.3 V or 5 V boards

  • TypeSingle Board Computers
  • Ultra-low power draw only during refresh cycles
  • 13 inch 250x122 pixel E-Ink panel
  • Content stays visible without any backlight power
  • 40-pin GPIO header fits Raspberry Pi and Jetson Nano
  • SPI interface plus 3.3V/5V level shifting onboard

Compact E-Ink HAT for Raspberry Pi Projects

This 2.13inch E-Ink Display HAT V4 adds a 250x122 pixel screen to Raspberry Pi boards from the Pi 5 down to the Zero family and Pico variants. It connects through the standard 40PIN GPIO header and communicates via SPI. Makers building shelf labels, instrument readouts or portable status panels can use the onboard voltage translator that works with both 3.3V and 5V logic. The board also supports Jetson Nano and Arduino-class controllers for wider prototyping.

40-pin header and SPI make integration

The HAT sits directly on the Raspberry Pi GPIO header without extra cabling, while the SPI interface keeps wiring simple for other microcontrollers. A built-in level shifter handles 3.3V and 5V systems so the same module moves between platforms. Partial refresh support lets developers update only changed screen areas, reducing full redraw cycles. Online manuals cover Raspberry Pi, Jetson Nano, Arduino and STM32 examples to accelerate first boot.

Ultra-low power with persistent image retention

The electrophoretic panel draws power only during refresh events and holds the last image indefinitely without electricity. No backlight means zero standby current, ideal for battery-powered or energy-harvesting nodes. Wide viewing angles keep data readable from off-axis positions in industrial or retail settings. The V4 screen revision maintains full compatibility with earlier V3 code while adding a fast-refresh demo for smoother animations.

Pluspunten

  • Ultra-low power draw only during refresh cycles
  • 13 inch 250x122 pixel E-Ink panel
  • Content stays visible without any backlight power
  • 40-pin GPIO header fits Raspberry Pi and Jetson Nano
  • SPI interface plus 3.3V/5V level shifting onboard

Specificaties

TypeSingle Board Computers

Vragen over dit artikel

What resolution does the 2.13 inch SPI e-ink panel actually show?

The display shows a 250 by 122 pixel image in black and white.

Which Raspberry Pi header does the HAT plug into?

It uses the standard 40 pin GPIO extension header found on every full size Pi board.

How do I enable the fast refresh mode mentioned for the V4 screen?

Follow the online user manual and run the supplied V4 demo code; the fast refresh function is demonstrated there.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.